+- Woodnet Forums (https://www.forums.woodnet.net)
+-- Thread: Trip to Wall E World (/showthread.php?tid=7353028)
Pages:
1
2
Trip to Wall E World - bandit571 - 02-19-2020
Was going to pick up a 6 of Vitamin B.....
[attachment=24202]
After all, I am a Grumpy Auld Mick....when a hammer deal was found...
[attachment=24203]
A $6 hammer, that MIGHT work better when drive me chisels..
[attachment=24204]
May give it a try out, later?
RE: Trip to Wall E World - Admiral - 02-19-2020
Make one out of wood.
RE: Trip to Wall E World - Bob10 - 02-19-2020
(02-19-2020, 05:36 PM)Admiral Wrote: Make one out of wood.
Now tell him which plane to use and how to hold it
RE: Trip to Wall E World - hbmcc - 02-19-2020
Jeeze, Steve. Why didn't you get more vitamins instead?
RE: Trip to Wall E World - mound - 02-20-2020
I hope both the Guinness and the hammer followed you home!
RE: Trip to Wall E World - Admiral - 02-20-2020
(02-19-2020, 05:52 PM)Bob10 Wrote: Now tell him which plane to use and how to hold it
I would never presume to do that, as we all have our ways of skinning a cat.... But I haven't seen Steve use one of these:
![[Image: 20140928-OMD80433.jpg?w=540&ssl=1]](https://i0.wp.com/www.daedtoolworks.com/wp-content/uploads/2014/10/20140928-OMD80433.jpg?w=540&ssl=1)
http://www.daedtoolworks.com/coffins/
which we all intuitively know are absolutely essential for making a serviceable mallet!
RE: Trip to Wall E World - bandit571 - 02-20-2020
1/2 of the Guinness is now gone....
Since Paul Sellers seems to like that style of hammer, thought i would at least try one.
As for a wooden mallet...
[attachment=24218]
BTDT several years ago....
RE: Trip to Wall E World - Admiral - 02-20-2020
I've turned a few myself; I was thinking of a jointers mallet! :-)
RE: Trip to Wall E World - bandit571 - 02-21-2020
Had to retire that wooden mallet...
[attachment=24245]
Was getting a bit too flaky...balance was off...
[attachment=24246]
The rawhide one was...ok...tended to bounce back too much....
RE: Trip to Wall E World - Tony Z - 02-21-2020
I have actually used a hammer similar to Bandit's for decades-hard plastic face and soft rubber face. Craftsman brand and now available at Lowes. Worked very well. Lesser used is a "Wood is Good" brand round mallet.