Woodnet Forums
Hall Table: final photos - Printable Version

+- Woodnet Forums (https://www.forums.woodnet.net)
+-- Thread: Hall Table: final photos (/showthread.php?tid=7353628)

Hall Table: final photos - Derek Cohen - 03-17-2020

For those that began following my build but do not go to the hand tool forum, here is a link to the final photos:

http://www.inthewoodshop.com/Furniture/EntryHallTableForANieceFinal2.html

Regards from Perth

Derek

RE: Hall Table: final photos - stav - 03-17-2020

(03-17-2020, 09:55 AM)Derek Cohen Wrote: For those that began following my build but do not go to the hand tool forum, here is a link to the final photos:

http://www.inthewoodshop.com/Furniture/EntryHallTableForANieceFinal2.html

Regards from Perth

Derek

Its well worth the time to go take a look at this piece.

RE: Hall Table: final photos - FrankAtl - 03-18-2020

I always enjoy looking at your work Derek. Thank you for taking the time to document it so well!

RE: Hall Table: final photos - handi - 03-22-2020

Followed the build quite a bit. Nice design and executed very well!

RE: Hall Table: final photos - mound - 03-22-2020

what a build along it was! love it.. kept meaning to ask, but will here, what's this little groove for (circled in red)

RE: Hall Table: final photos - Derek Cohen - 03-23-2020

My, you have eagle eyes!

That "little groove" is the top of the slip as it exits under the drawer back ...

[Image: EntryHallTableForANiece11_html_3116a6e8.jpg]

[Image: EntryHallTableForANieceFinal2_html_mdfdb633.jpg]

Regards from Perth

Derek

RE: Hall Table: final photos - mound - 03-23-2020

(03-23-2020, 06:19 AM)Derek Cohen Wrote: My, you have eagle eyes!

That "little groove" is the top of the slip as it exits under the drawer back ...

[Image: EntryHallTableForANiece11_html_3116a6e8.jpg]

[Image: EntryHallTableForANieceFinal2_html_mdfdb633.jpg]

Regards from Perth

Derek

Thanks! But the groove itself.. Just an aesthetic thing to make the slip look nicer?

RE: Hall Table: final photos - Derek Cohen - 03-23-2020

Yes, aesthetic thing.

Firstly, the slip has grain running down the drawer (front-to-back) and the drawer bottom has grain running across the drawer (side-to-side). Creating a bead at the junction makes them blend better.

Secondly, it is difficult to create a perfect joint (even though you know I am capable of this
No ), and a bead hides any imperfections.

Regards from Perth

Derek

RE: Hall Table: final photos - mound - 03-23-2020

(03-23-2020, 07:50 AM)Derek Cohen Wrote: Yes, aesthetic thing.

Firstly, the slip has grain running down the drawer (front-to-back) and the drawer bottom has grain running across the drawer (side-to-side). Creating a bead at the junction makes them blend better.

Secondly, it is difficult to create a perfect joint (even though you know I am capable of this
No ), and a bead hides any imperfections.

Regards from Perth

Derek

strive for perfection, attain excellence!


Cool

RE: Hall Table: final photos - BrokenOlMarine - 03-23-2020

Beautiful work, as always.