+- Woodnet Forums (https://forums.woodnet.net)
+-- Thread: SOLD FS: Drill Press Milling Attachment (/showthread.php?tid=7353669)
SOLD FS: Drill Press Milling Attachment - Rick_B - 03-18-2020
ITEM HAS BEEN SOLD
This drill press accessory was manufactured by Waterborg (see ad below). It fits a drill press with a 2-3/4" column and will accept tools with a 3/8 diameter shank - although a creative person could make a different tool holder if desired. The collet that holds the tool holder has a 1/2" diameter with a JT33 female end for the drill press spinde. Not much else I can say about it.
I have no idea what the value of this accessory may be so I'm asking $125 + shipping as a starting point but will consider any reasonable offers. You can't insult me with an offer. This should fit in a medium flat rate box.
Thanks for looking
Rick
[attachment=24992]
[attachment=24993]
[attachment=24994]
[attachment=24995]
[attachment=24996]
RE: FS: Drill Press Milling Attachment - Eric Commarato - 03-18-2020
That's pretty cool! Sort of eliminates the side forces from the quill bearings...