+- Woodnet Forums (https://forums.woodnet.net)
+-- Thread: Chisel tips from Bill Carter (/showthread.php?tid=7353976)
Pages:
1
2
Chisel tips from Bill Carter - Timberwolf - 03-27-2020
good info.......
https://www.youtube.com/watch?v=re_bp5Lp0To
RE: Chisel tips from Bill Carter - Tapper - 03-27-2020
Chisel as a scraper!
Doug
RE: Chisel tips from Bill Carter - barryvabeach - 03-27-2020
Thanks for posting, I liked the video
RE: Chisel tips from Bill Carter - enjuneer - 03-27-2020
(03-27-2020, 02:03 PM)Tapper Wrote: Chisel as a scraper!
Doug
It works well. I made a couple in different sizes a few years ago.
RE: Chisel tips from Bill Carter - Tony Z - 03-29-2020
I've used chisels as scrapers for years, works very well, and thet're easy to grip.
RE: Chisel tips from Bill Carter - Scoony - 03-30-2020
(03-27-2020, 02:03 PM)Tapper Wrote: Chisel as a scraper!
Doug
I used a lathe scraper chisel to bed an iron in a wooden plane. Works great at removing the high spots and leveling, and leaves a finished surface
RE: Chisel tips from Bill Carter - CStan - 03-31-2020
"Finished surface?" You've all gone quite mad, how can it produce a finished surface, it doesn't have a cap iron.... :-)
RE: Chisel tips from Bill Carter - Timberwolf - 03-31-2020
(03-31-2020, 11:43 AM)CStan Wrote: "Finished surface?" You've all gone quite mad, how can it produce a finished surface, it doesn't have a cap iron.... :-)
.........................
Ok...now you've done it..........Just wait awhile and LV will be marketing one.........
And the neat thing about it is....it will work !!!!!!!!! 
RE: Chisel tips from Bill Carter - CStan - 03-31-2020
(03-31-2020, 01:03 PM)Timberwolf Wrote: .........................
Ok...now you've done it..........Just wait awhile and LV will be marketing one.........
It wouldn't surprise me a bit...
RE: Chisel tips from Bill Carter - bandit571 - 03-31-2020
Or Woodpecker will come out with a "One Time Tool" version.....