(04-04-2020, 09:03 PM)KLaz Wrote: Well, since we have some extra time on our hands here lately, thought I’d give you guys a glimpse into my shop.  I enjoy seeing other shops and getting ideas from how others operate in their work spaces.  Usually when you guys post photos of your projects and work in progress, I’m always looking around in the background of your photos to see how your setups are and any cool tools you have.
 
So without further ado, here is what my shop looks like….
 
27’ x 26’ in two bays of our three bay garage.  My wife said she had to have a bay to park her car in and the rest was mine!  So I put up a wall between the shop and her bay so it stays clean and dust free.  Ceilings are 10’
 
Just recently installed 13 – 8’ Barrina LED lights from Amazon.  Got to say, I’m pretty impressed with these lights and at around $22 each, you can’t beat them.
 
The shop is also conditioned which is certainly nice in the winter!
 
Walking into the shop from her bay, there is a 4’ wide solid core birch door that I cut in a vision lite in.  It was left over from one of my commercial projects years ago so a free door and frame is nice!  Heck, it’s even 2 hour fire rated!  Well, it was until I cut the vision lite in it!
 
Overview of the shop as you walk in


 
East wall is where I keep the essentials to assemble and lay out projects.  Clamps are all right at arm’s length to grab and put away, peg board keeps tools that I use quite often ready to grab and the cabinets hold a multitude of items such as layout tools, drilling accessories, pencils, note pads and one drawer is a file drawer where I keep records of projects.  All tool manuals are kept in three ring binders you see in the top of the wall cabinet.  Alphabetically in order so easy to find a manual if I need it.  Of course the utility sink is almost a necessity in a shop and the fridge is a nice bonus!  Further on down is a short wall I built to store Festool tracks and long rules, levels and such.  On the other side of that is the compressor and DC




 
MFT style work table on the Rockler mobile base.  Festool vacuum clamping system at the ready when batching a lot of panel parts.


 
Hand tool cabinet.  Hand tool bench is in progress….


 
Unisaw with Excalibur overarm guard, but replaced with a Shark Guard hood.  Much better than the stock hood


 
Custom made outfeed table.  2 ½ thick solid top with laminate (same color that Incra uses for their laminate, just because)  Router table built in and threaded inserts installed in the top to attach the Incra fence when I need it.  Crosscut sleds sit in the shelves ready to go when I need them.




 
Grizzly oscillating sander, PM 3520b lathe, sharpening station and PM disc/belt sander sit back in the northwest corner of the shop.  Overhead storage above the lathe for miscellaneous wood for turning and what not.  The clear curtain you see is when I’m doing a lot of turning I can close this area off and keep shavings confined to that small 10 x 10 area and not have to clean a lot mess up around the table saw and such.  If you can spy the pile of maple on the floor behind the oscillating sander, that’s the future Roubo bench with Benchcrafted vises in the works.


 
Yes, I’m motocross fan and I used to race back in the 90’s.
 
Grizzly ultimate 19” band saw
 


Well that is Part 1.  Says I've reached my 10 picture limit.  Part 2 coming up.....

(04-30-2020, 09:28 PM)2beast Wrote: Beautiful shop, very inspiring!