+- Woodnet Forums (https://forums.woodnet.net)
+-- Thread: how to protect area around door knob from wear and tear? (/showthread.php?tid=7354424)
how to protect area around door knob from wear and tear? - p_leyden - 04-10-2020
My bathroom door was painted with latex paint which takes a beating from normal traffic, especially around the door knob area.
I am looking for ideas for low cost protection for that immediate area.
PS - in the future I will never paint any door with latex paint.Alkyd paint is tough and flows out like a spray paint job!
Thanks for any and all ideas, Pete Leyden
RE: how to protect area around door knob from wear and tear? - Gary G™ - 04-12-2020
Brass plate? ......
RE: how to protect area around door knob from wear and tear? - Snipe Hunter - 04-12-2020
Enamel ....................
RE: how to protect area around door knob from wear and tear? - Stwood_ - 04-12-2020
Fit some scrap plexiglass around the knob.
Holesaw for the center cut, bandsaw for the outer cut.
A couple of plated, well places \/ head screws to hold it on.
RE: how to protect area around door knob from wear and tear? - jteneyck - 04-12-2020
(04-10-2020, 02:20 PM)p_leyden Wrote: My bathroom door was painted with latex paint which takes a beating from normal traffic, especially around the door knob area.
I am looking for ideas for low cost protection for that immediate area.
PS - in the future I will never paint any door with latex paint.Alkyd paint is tough and flows out like a spray paint job!
Thanks for any and all ideas, Pete Leyden
Train the occupants to use the handle. Drives me nuts why people put their hands on the woodwork. My parents beat that into our heads when I was young. Too bad my wife's parents didn't feel the need.
John
RE: how to protect area around door knob from wear and tear? - JDuke - 04-12-2020
(04-12-2020, 08:49 AM)Gary G™ Wrote: Brass plate? ......
Funny thing those brass plates, at pretty much any Naval training command they will be quite shiny due the frequency with which they are cleaned, and there will almost always be paint worn off elsewhere on doors due to the majority of trainees avoiding touching the
‘bright work’
RE: how to protect area around door knob from wear and tear? - bargrove - 04-13-2020
(04-12-2020, 05:50 PM)JDuke Wrote: Funny thing those brass plates, at pretty much any Naval training command they will be quite shiny due the frequency with which they are cleaned, and there will almost always be paint worn off elsewhere on doors due to the majority of trainees avoiding touching the
‘bright work’
Irony of the day
![[Image: wink.png]](https://forums.woodnet.net/images/icons/wink.png){kind=icon}
RE: how to protect area around door knob from wear and tear? - crokett™ - 04-13-2020
(04-12-2020, 12:11 PM)jteneyck Wrote: Train the occupants to use the handle. Drives me nuts why people put their hands on the woodwork. My parents beat that into our heads when I was young. Too bad my wife's parents didn't feel the need.
John
that might work at home. I avoid bathroom door handles out in public. I've seen too many men not wash their hands. IMO, every door in public needs one of those hooks that you can put your forearm into to open the door. I try to avoid bathrooms that don't have a paper towel dispenser, because if the door has to be pulled to open (most do) I have to touch the handle.