+- Woodnet Forums (https://forums.woodnet.net)
+-- Thread: Yard Sale Season, 2020 (/showthread.php?tid=7355444)
Yard Sale Season, 2020 - bandit571 - 05-23-2020
Has started back up.....
Bought a big box of Lego parts, for the GrandBRAT...$8.....as for me?
Spent a grand total of $6...
[attachment=27126]
This baggie was a dollar...and
[attachment=27127]
These two totaled $5....not too sure about that pencil...
[attachment=27128]
I did clean the Wm Johnson of Newark,NJ 6" compass, and give it a new pencil
[attachment=27129]
And, have sharpened the factory edge of the iron on that Stanley No. 110 Bottlecap block plane ( chose it, over a Millers Falls No. 75, that was also there)
[attachment=27130]
Sale was actually the second sale of the day..first one was just clothes, and nic-nacs
So...about that baggie...
[attachment=27131]
And...
[attachment=27132]
And...
[attachment=27133]
Not sure why there was a letter stamp in there ( S ), and what holder for those two HUGE tips I' d...
Not too bad, for the first of the season....
RE: Yard Sale Season, 2020 - farmerj111 - 05-23-2020
That's a pretty nice haul for 6 bucks!
RE: Yard Sale Season, 2020 - Bill_Houghton - 05-23-2020
Nice hauls, but you don't get any points for the grandkid unless you post a picture of him/her.
You're no doubt aware that, if you find a suitable length of 5/16" rod of the right quality (like drill rod, for instance), you can grind a point on it and have a pair of 6" dividers, too.
I've never heard that type of block plane being called a "bottlecap" plane, but the name's sure right. And, yes, smart move over buying a No. 75 paperweight rabbet plane of pretty much any brand.
RE: Yard Sale Season, 2020 - bandit571 - 05-23-2020
hmmm...he's too busy with the X-Box...
but..
[attachment=27139]
Large Flat Rate Shipping box...1/2 filled....
[attachment=27140]
Been digging down through all these pieces, trying to find out what all is in here..
[attachment=27141]
Work in Progress...
RE: Yard Sale Season, 2020 - bandit571 - 05-24-2020
The Millers Falls No. 75 was a block plane that looked just like the Stanley No. 110......instead of a "bottle cap"....it had a lobed wheel. Besides, I already had one in the shop.
That letter stamp....
[attachment=27146]
Is for the letter "S"....not too sure about those two HUGE bits....others in the picture are 1/4" hex.
Sale had quite a few metal toolboxes, some power tools, LOTS of hand tools.
Still, not too bad, for the first of the season.....
RE: Yard Sale Season, 2020 - bandit571 - 05-24-2020
Alrighty....Stanley No. has been cleaned up, and the iron is sharp...
[attachment=27150]
Took a bit of "hammer adjust"....from Moxxon TP down to see through shavings....
There is a Millers Falls clone in the shop...
[attachment=27151]
Stamped in the left side...Millers Falls No. 75
Was putting the Stanley through it's paces, today..
[attachment=27152]
Seems some of the parts needed flattened...
[attachment=27153]
Resaws weren't quite flat....
Might be a decent enough block plane....for under $3?
RE: Yard Sale Season, 2020 - Bill_Houghton - 05-24-2020
People think you have to have a fancy block plane with adjustable mouth and fine adjusters and all that...not always.