+- Woodnet Forums (https://forums.woodnet.net)
+-- Thread: shop vac wye for router table (/showthread.php?tid=7355774)
shop vac wye for router table - jussi - 06-06-2020
Looking to split my fein vac to use for my router table. One for under and one at the fence. Under the table the port is 2-1/2" and around 1-1/4 on the fence I think. Any suggestions for a wye
RE: shop vac wye for router table - Cabinet Monkey - 06-07-2020
1 1/4" is pretty small on the fence. Typically they are 2 1/2" .
At any rate, I think your Fein is going to have trouble keeping up with two ports simultaneously on a router table.
If you wanna have a go though:
https://www.ptreeusa.com/dust_index.html
- or -
https://www.highlandwoodworking.com/dust-hoses-adapters-connectionhardware.aspx?page=3
RE: shop vac wye for router table - Phil Thien - 06-07-2020
I do all my router collection via a box surrounding the router. As long as things are sealed up well, it gets most everything, even edge profiles.
RE: shop vac wye for router table - Stwood_ - 06-07-2020
Increase your fence fitting to 2-1/2, then attach a Y https://www.ptreeusa.com/dust_Y.html on the bottom side, then add a hose to the fence.
You can vary that hookup.