Drawer and jewelry box question - Printable Version +- Woodnet Forums (https://www.forums.woodnet.net) +-- Thread: Drawer and jewelry box question (/showthread.php?tid=7355837) |
Drawer and jewelry box question - stoppy - 06-09-2020 [attachment=27515][attachment=27515] This a pic of a jewelry bandsaw box drawer I’m making for one of our grand daughters. I had asked about a delamination in the “deleted, deleted” thread. I was able to repair it. It was on each side in the first board that the drawer sides were cut. The jewelry box has 5 drawers. This is the top drawer and the first one I flocked. My new questions concern final finish. I’m thinking a high gloss clear finish. Grandma thinks it should be a matte finish. I would like opinions. The second question has to do with taping the sides and prior to flocking. On this first drawer I used a good grade masking tape that I was told would be good for this, I did not get good sharp edges. Is there a better tape for this like the 3M blue painters tape? RE: Drawer and jewelry box question - firefighter - 06-10-2020 #1 where is the gift going? Do some reading on types of finishes to see what shows dust and such. Gloss finish showes EVERYTHING. When I flock I use the frog tape. Leaves a nice clean line every time. Nice job on the boxes. |