+- Woodnet Forums (https://forums.woodnet.net)
+-- Thread: Grizzly G0899 Hybrid Table Saw (/showthread.php?tid=7356210)
Grizzly G0899 Hybrid Table Saw - cputnam - 06-26-2020
Opinions?
I'm worried about the fence. There does not appear to be anyplace to attach anything to it. Is it amenable to a wood sub-fence?
RE: Grizzly G0899 Hybrid Table Saw - stav - 06-27-2020
The fence looks like a Euro style (or Delta Unifence) fence. You might be able to attach the Uni-T-Fence to it.
Uni-T-Fence
There was also the Bigafence home build option.
Bigafence
RE: Grizzly G0899 Hybrid Table Saw - GeeDub - 06-27-2020
You can cut a t-slot into your sac fence and attach it in place of the aluminum extrusion. If you don't have the router bits for it, a dado and some hardboard can be used in a glue up.
[attachment=27940]
RE: Grizzly G0899 Hybrid Table Saw - OBG53 - 06-27-2020
I have the G0833P which is the precursor to the G0899. Grizzly told me that the G0899 is being made in a different factory in China and has replaced the G0833P. The fence system are the same. I added the Peachtree Uni-T fence to my G0833P and it works well. I have it aligned to within .001" from parallel to the miter slot. With the Uni-T fence you can use hold downs but not with the stock fence. BTW, if you get the G0899, I would recommend the Shark Guard for it as well as the riving knife for the G0833P which would be the same as for the G0899. Another thing I would recommend is to change the dust port to a dedicated 4" and remove theirs. I modified the outlet by drilling new holes in the existing area, but if I had to do it again, I would drill out a hole in the rear of the cabinet and attach the 4" port there.
RE: Grizzly G0899 Hybrid Table Saw - kurt18947 - 06-27-2020
(06-26-2020, 08:19 PM)cputnam Wrote: Opinions?
I'm worried about the fence. There does not appear to be anyplace to attach anything to it. Is it amenable to a wood sub-fence?
From the looks of it, I wonder if T track would fit the fasteners on the fence stub. If it did, you could fabricate any fence face that strikes your fancy. I'd also wonder about 8020.