+- Woodnet Forums (https://forums.woodnet.net)
+-- Thread: Delta Hollow Chisel Mortiser (/showthread.php?tid=7356685)
Delta Hollow Chisel Mortiser - adt2 - 07-17-2020
Hiya - Doing some workshop cleanup the last few weeks, and I've got a few things to find new homes for. First up is this Delta 1/2hp Hollow Chisel Mortiser, model MM300. It's old, maybe 10-12 years, but it's only been used one time. I dusted it off and flipped the switch and it fired right up. Fair warning, the bare steel parts - including the drill bits and chisels - have a uniform coat of rust, but it doesn't appear to hinder the tool's operation.
Would like to get $150, and I'll bring it to you within a reasonable distance of Houston TX. (I'm in Magnolia, about 40mi north of downtown, but I work all over the place.) Feel free to reach out with questions.
[attachment=28396]
[attachment=28397]
[attachment=28398]
[attachment=28399]
[attachment=28400]
[attachment=28401]
[attachment=28402]
RE: Delta Hollow Chisel Mortiser - jppierson - 07-18-2020
Pics arent showing
RE: Delta Hollow Chisel Mortiser - adt2 - 07-18-2020
Not sure what I'm doing wrong re: pics. They show up fine on my end, both on my laptop and on my phone. I'm happy to text/email/Dropbox etc. photos to anyone interested.
RE: Delta Hollow Chisel Mortiser - adt2 - 07-20-2020
Updated original post to change photo format; they should be visible now.
RE: Delta Hollow Chisel Mortiser - badwhiskey - 07-20-2020
(07-20-2020, 08:04 AM)adt2 Wrote: Updated original post to change photo format; they should be visible now.
Yes, pictures show up now.
RE: Delta Hollow Chisel Mortiser - adt2 - 07-23-2020
Bump. Happy to consider offers on this one. Would like to find it a new home.
RE: Delta Hollow Chisel Mortiser - artj - 08-08-2020
I live in Spring so I might be interested. What is the widest board that you can mortise? I would want to come up to your place and see it before I purchase.
RE: Delta Hollow Chisel Mortiser - adt2 - 08-10-2020
(08-08-2020, 06:25 PM)artj Wrote: I live in Spring so I might be interested. What is the widest board that you can mortise? I would want to come up to your place and see it before I purchase.
Hmm, not sure re: widest board. Would think maybe 8-12"? There's about 4-6" between the bit and the post. I'm in Magnolia; you're welcome to come take a look. I'm home most of the week (yay, coronavirus).
Andy