Cutoff Storage - Printable Version +- Woodnet Forums (https://forums.woodnet.net) +-- Thread: Cutoff Storage (/showthread.php?tid=7356854) |
Cutoff Storage - lincmercguy - 07-26-2020 I've been thinking about building some type of cutoff storage for hardwood and some plywood. Of course, there are a bunch of different ones that pop up with a search. I'm wondering what experience people have had with different styles here and what they would recommend. I'm trying to keep the use of floor space for it to a minimum. I have plenty of height to work with in the shop. RE: Cutoff Storage - fredhargis - 07-27-2020 This may not fit your criteria, but I built this one after I saw it on the Woodsmith show. It's worked fairly well, though like most storage areas it quickly became too small. [attachment=28602] RE: Cutoff Storage - BpB123 - 07-27-2020 This is what I have been using for the past few years. Not sure where I found the basic concept (not my design). I have since modified it by added 2 more cross pieces (4 more casters). One side has a clamp rack. The other side for sheet goods (resting on the cross pieces) On the far left side & "middle left" I store vertical pieces. The rest are horizontal storage, with removal from the right side (narrow end) Hope it gives you a few other ideas -Brian RE: Cutoff Storage - mikefm101 - 07-28-2020 I have wall storage for lumber so it sits horizontally. The top “shelves “ are just metaL conduit the rough sawn lumber lays on. The bottom tier I laid a piece of ply across, then added two or three more shelves on top each about 6” high My shorts can fit on that Bottom shelf perpendicular to the width of the rack. Longer shorts go in a wheeled 2’ x 3’ box with a Couple of dividers. The horizontal shelf-within-a-shelf I Organize by species. Hopefully it makes sense. Mike RE: Cutoff Storage - Halfathumb - 07-29-2020 Several years ago I made a cart that would hold fulls 4 X 8 sheet goods on 1 side and boxes similar to the one Fred shows. But it got in the way over the years even though it was on wheels. Like just about every shop, room is at a premium. Sorry I don't have a picture. Jim RE: Cutoff Storage - Gary G™ - 07-31-2020 Vertical filing cabinets work good for milled offcut and drops. I have a bunch of Hon’s I got free. Works great for stuff about 24” long. RE: Cutoff Storage - Tapper - 08-03-2020 Fred, do you have a plan for that one? Thanks, Doug RE: Cutoff Storage - fredhargis - 08-03-2020 Doug, I have the PDF file that Woodsmith gave me. I can e mail it if you like. (PM your address) RE: Cutoff Storage - Tapper - 08-04-2020 (08-03-2020, 10:23 AM)fredhargis Wrote: Doug, I have the PDF file that Woodsmith gave me. I can e mail it if you like. (PM your address) PM sent Fred - thanks! Doug |