+- Woodnet Forums (https://www.forums.woodnet.net)
+-- Thread: Rockler T-Track Table Top Questions (/showthread.php?tid=7357129)
Rockler T-Track Table Top Questions - walkman - 08-10-2020
I'm about to built a stand to support one these and have a couple of questions for anyone who has used one:
1) Does the table top need a piece of plywood or MDF under it for strength or is a frame with 2-3 cross-members enough support?
2) Does anyone flip the top depending on what they are working on (the bottom is a nice, smooth flat surface).
RE: Rockler T-Track Table Top Questions - Halfathumb - 08-11-2020
(08-10-2020, 03:43 PM)walkman Wrote: I'm about to built a stand to support one these and have a couple of questions for anyone who has used one:
1) Does the table top need a piece of plywood or MDF under it for strength or is a frame with 2-3 cross-members enough support?
2) Does anyone flip the top depending on what they are working on (the bottom is a nice, smooth flat surface).
I usually keep on this with the smooth side up as a work surface,
Rockler Material Mate Panel Cart and Shop Stand
except when I'm using the cart for plywood, etc.
I don't think you'll need any MDF or plywood support. It's pretty sturdy by itself.
Jim