+- Woodnet Forums (https://www.forums.woodnet.net)
+-- Thread: hard-wire a remotely controlled ceiling fan/light to wall switch? (/showthread.php?tid=7357626)
hard-wire a remotely controlled ceiling fan/light to wall switch? - mound - 09-07-2020
I have this switch already installed in the wall with a 3-wire (black/white/red/ground) running into the ceiling:
https://www.homedepot.com/p/Lutron-Maestro-Fan-Control-and-Light-Dimmer-for-dimmable-LEDs-Incandescent-and-Halogen-Bulbs-Single-Pole-White-MACL-LFQH-WH/303169873
Wish to install this fan, but do not want remote control, want to fully control from the wall switch:
https://www.homedepot.com/p/Home-Decorators-Collection-Ashby-Park-52-in-White-Color-Changing-Integrated-LED-Brushed-Nickel-Ceiling-Fan-with-Light-Kit-and-Remote-Control-59252/308039187
Does anybody have instructions for properly doing so?
Thanks
RE: hard-wire a remotely controlled ceiling fan/light to wall switch? - Snipe Hunter - 09-07-2020
So, when I remodeled the upstairs, I ran 3 conductor wire to all the ceiling fan boxes only to find out that you can't install a modern remote control fan on a 3 conductor circuit. I read about a few "fixes" to separate the fan from the light and tried a couple but none worked.
In my mind, I still think I can rewire the guts of the fan and separate the light from the fan but I wasn't able to do it. Don't remember why I couldn't do it but I couldn't
RE: hard-wire a remotely controlled ceiling fan/light to wall switch? - mound - 09-07-2020
(09-07-2020, 11:25 AM)Snipe Hunter Wrote: So, when I remodeled the upstairs, I ran 3 conductor wire to all the ceiling fan boxes only to find out that you can't install a modern remote control fan on a 3 conductor circuit. I read about a few "fixes" to separate the fan from the light and tried a couple but none worked.
In my mind, I still think I can rewire the guts of the fan and separate the light from the fan but I wasn't able to do it. Don't remember why I couldn't do it but I couldn't
I did find this video which might be something
https://www.youtube.com/watch?v=M0NvjKEEr9s
RE: hard-wire a remotely controlled ceiling fan/light to wall switch? - mound - 09-08-2020
Actually, for this particular fan and switch, I found I could simply wire the 3-wire from the wall directly bypassing the internal receiver, and everything works fine.