Woodnet Forums
Jet 1220 lathe switch - Printable Version

+- Woodnet Forums (https://www.forums.woodnet.net)
+-- Thread: Jet 1220 lathe switch (/showthread.php?tid=7357641)



Jet 1220 lathe switch - scpapa - 09-07-2020

finally broke. Where can I find a replacement cheaper than $20? It doesn't have to the exact replacement, just fit where the old did and wire the same.

Rick


RE: Jet 1220 lathe switch - Ohio Mike - 09-08-2020

(09-07-2020, 05:48 PM)scpapa Wrote: finally broke. Where can I find a replacement cheaper than $20? It doesn't have to the exact replacement, just fit where the old did and wire the same.

Rick

This one is $11 and says it fits an opening of 1.5" x 7/8"

https://www.amazon.com/HQRP-Rockwell-Hitachi-Performax-Craftsman/dp/B07LBN6SXZ/ref=sr_1_2?dchild=1&keywords=HQRP+On-Off+Toggle+Switch&qid=1599591223&sr=8-2


RE: Jet 1220 lathe switch - scpapa - 09-08-2020

(09-08-2020, 01:55 PM)Ohio Mike Wrote: This one is $11 and says it fits an opening of 1.5" x 7/8"

https://www.amazon.com/HQRP-Rockwell-Hitachi-Performax-Craftsman/dp/B07LBN6SXZ/ref=sr_1_2?dchild=1&keywords=HQRP+On-Off+Toggle+Switch&qid=1599591223&sr=8-2

Thanks, I looked at 31 pages of Amazon switches and never saw that one. I guess my search criteria was insufficient.
Ordering now.

Rick


RE: Jet 1220 lathe switch - scpapa - 09-13-2020

(09-08-2020, 01:55 PM)Ohio Mike Wrote: This one is $11 and says it fits an opening of 1.5" x 7/8"

https://www.amazon.com/HQRP-Rockwell-Hitachi-Performax-Craftsman
I received it the other day and it is working great. Thanks again

Rick


RE: Jet 1220 lathe switch - Ohio Mike - 09-14-2020

(09-13-2020, 01:04 PM)scpapa Wrote: I received it the other day and it is working great. Thanks again

Rick

Great! Cool

I'm glad it worked out.