+- Woodnet Forums (https://forums.woodnet.net)
+-- Thread: Two Infinity Rip Bandsaw Blades (/showthread.php?tid=7357985)
Two Infinity Rip Bandsaw Blades - iublue - 09-26-2020
I ordered these blades but they will not fit my new bandsaw. Both are BRAND NEW. One still has the shipping paper on it.
Here is a link to the page with the blades.
https://www.infinitytools.com/infinity-rip-band-saw-blades
Cut and paste about the blades.
BSB-144.750IR
Infinity Rip Bandsaw Blade
IN STOCK
144"
3/4"
3-4 Variable TPI
Hook
$44.90
You can buy two for $35.91 each for a total of $71.82 plus shipping.
I will sell both for $60 including shipping CONUS.
Let's get them into someones shop that can use them.
Toney
RE: Two Infinity Rip Bandsaw Blades - iublue - 10-03-2020
(09-26-2020, 06:09 PM)iublue Wrote: I ordered these blades but they will not fit my new bandsaw. Both are BRAND NEW. One still has the shipping paper on it.
Here is a link to the page with the blades.
https://www.infinitytools.com/infinity-rip-band-saw-blades
Cut and paste about the blades.
BSB-144.750IR
Infinity Rip Bandsaw Blade
IN STOCK
144"
3/4"
3-4 Variable TPI
Hook
$44.90
You can buy two for $35.91 each for a total of $71.82 plus shipping.
I will sell both for $60 including shipping CONUS.
Let's get them into someones shop that can use them.
Toney
Bump. No one needs these blades?
RE: Two Infinity Rip Bandsaw Blades - alanealane - 10-03-2020
Its ironic that last year I literally just sold my big bandsaw that took this exact length blade. I always had to have them custom made because 144 isn't an off-the-shelf size.
RE: Two Infinity Rip Bandsaw Blades - sniper - 10-03-2020
(10-03-2020, 07:55 AM)iublue Wrote: Bump. No one needs these blades?
I'd be interested, but they're 13" to long.
RE: Two Infinity Rip Bandsaw Blades - Arlin Eastman - 10-03-2020
(10-03-2020, 11:19 AM)sniper Wrote: I'd be interested, but they're 13" to long.
You can go to a shop and have them cut and re-welded. That is what I would do if it fit my 14" band saw but it will not take 3/4" wide.
RE: Two Infinity Rip Bandsaw Blades - iublue - 10-12-2020
One last bump.
Is price an issue or is there no one that needs this size.
RE: Two Infinity Rip Bandsaw Blades - cvillewood - 10-12-2020
I’d buy them if they were a foot longer. Problem is you have a somewhat small pool of bandsaw blade buyers, and a very small pool of 144” blade buyers. Might help to post a few bandsaws that these would fit.