+- Woodnet Forums (https://forums.woodnet.net)
+-- Thread: Noise levels in my workshop (/showthread.php?tid=7358977)
Noise levels in my workshop - Derek Cohen - 11-17-2020
I have added a Powered Tools and Machinery section to my website.
In this section I plan to add articles about the power tools and machines that I use in my workshop, with the modifications I have made over the years, along with the techniques which I hope others will find helpful in using them to dimension and create joinery.
The first article is just a baseline for the level of noise for the machines and power tools I have.
http://www.inthewoodshop.com/Powered%20Tools%20and%20Machinery/NoiseLevelsInMyWorkshop.html
Regards from Perth
Derek
RE: Noise levels in my workshop - barryvabeach - 11-17-2020
Derek, pretty interesting results. I keep two ear muffs - regular Peltors, in the shop and tend to use hearing protection for nearly everything but my lathe or cordless tools. Surprised your jointer thickness planer is so quiet, that is impressive.
RE: Noise levels in my workshop - Lumber Yard® - 11-17-2020
I did this awhile ago in my shop for just stationary tools. I measured the sound level with a phone app from about 4ft away. Remember that none of tools were engaged with any wood which wood significantly change a lot of these values.
A bunch of tools read in the high 60's, like my 8" 2HP jointer, 20" 5HP planer, 3HP Unisaw, 17" and 18" bandsaws, drum sander, edge sander, and 80 gal compressor, etc. A few of the other stationary tools were quieter in the 50 and low 60' like the spindle sander, lathe, drill press, etc. The loudest machine in my shop was my cyclone dust collector which rattles in at 80 dB.
RE: Noise levels in my workshop - shoottmx - 11-17-2020
Derek,
Interesting sound information, amazing that the circular saw is the noisest but essentially the smallest tool in the shop. 3M peltors and or soft earplugs work well for me in the shop.
g
RE: Noise levels in my workshop - DaveM123 - 11-18-2020
I started using the Sensgard Hearing Protection. They are lightweight and really cut back on the noise.
RE: Noise levels in my workshop - Cooler - 11-18-2020
http://www.woodworkingtips.com/etips/etip43.html
- Thickness planer and Radial Arm Saw: 105DB
- Router: 106DB
- Table Saw: 104DB
- Circular Saw: 110 DB
- Screw driver: 0 DB