Crosscut Sled Base Thickness - Printable Version +- Woodnet Forums (https://www.forums.woodnet.net) +-- Thread: Crosscut Sled Base Thickness (/showthread.php?tid=7359053) Pages:
1
2
|
RE: Crosscut Sled Base Thickness - R Clark - 11-25-2020 Lubricity is an awesome word. I've never used melamine for a sled. I like that it would glide across the tables surface, but I like the top side and the fence to be non-lubricitous. (Do you see what I did there?) I do have some melamine scrap, and I need a miter sled. Maybe I'll give it.a shot. I wax the bottoms of my sleds and jigs. Stay lubricitous my friends. RE: Crosscut Sled Base Thickness - Handplanesandmore - 11-25-2020 (11-21-2020, 12:04 PM)jcredding Wrote: Any reason not to use the 3/8"? None whatsoever as long as the sheet (as well as the table saw top) is flat. I know cuz I've built sleds using materials thinner than 3/8", just like Barryvabeach. Simon RE: Crosscut Sled Base Thickness - jcredding - 11-25-2020 Thanks to all. Got sidetracked with a mobile clamp storage rack and will build the sled this weekend. Will use the 3/8 bb ply and work to make it as lubricious as possible with the help of some paste wax. |