+- Woodnet Forums (https://forums.woodnet.net)
+-- Thread: What is it? (/showthread.php?tid=7359342)
What is it? - NORM ABRAHAM - 12-06-2020
[attachment=31478][attachment=31477][attachment=31476]Doing some cleanup for a friend. Any idea what this was used for?
Thanks!
Norm
RE: What is it? - iclark - 12-07-2020
PSI would be Penn State Industries.
The 4 rollers are too small for anything rough. So, first guess is that it rolls along a metal table edge or that it mounts to something that it guides.
Lots of possibilities. One that comes to mind is that it might mount the rectangular opening of a dust collector fitting to something. Were there some DC fittings that size in the shop?
What else was there in the PSI red paint?
RE: What is it? - Dave Crow - 12-07-2020
Hi Norm,
Here you go. PORTABLE PANEL SAW SYSTEM 2 #PPS-2
https://www.pennstateind.com/library/PPS-2_man.pdf
Dave
RE: What is it? - Stwood_ - 12-07-2020
(12-07-2020, 03:55 PM)Dave Crow Wrote: Hi Norm,
Here you go. PORTABLE PANEL SAW SYSTEM 2 #PPS-2
https://www.pennstateind.com/library/PPS-2_man.pdf
Dave
RE: What is it? - NORM ABRAHAM - 12-07-2020
You guys never cease to amaze me. Thanks for the information!
Norm
RE: What is it? - fall - 12-08-2020
This system in one of the earlier saw guilds on the market as I still have one hooked up to a porta cable saw. It still works great. I believe it is about 25 years old. The one in the link is one of the newer/ updated ones that has attached clamps and breaks down. Mine you have to use your own clamps like a quick grip clamp and had a sacrificial wood zero clearance chip rail. But the picture you posted is still the same on my old guild.
RE: What is it? - NORM ABRAHAM - 12-10-2020
Very interesting! Now I am looking for the rail it rides on..........Only time will tell.
RE: What is it? - Rick LoDico - 12-11-2020
[attachment=31556] I had that for a while and got the Festool track system. The PSI was just as accurate.
RE: What is it? - fall - 12-11-2020
(12-11-2020, 11:05 AM)Rick LoDico Wrote: I had that for a while and got the Festool track system. The PSI was just as accurate.
That's the same track I have for mine that I was talking about.... as stated just as accurate.