+- Woodnet Forums (https://forums.woodnet.net)
+-- Thread: PC 7549 repair (/showthread.php?tid=7359766)
PC 7549 repair - Gary G™ - 12-28-2020
Need a replacement Shaft-Roller for the jigsaw.
Part Number: 695778
Online says it’s discontinued.
I used a small bolt with nylon lock nut for a temp fix.
It’s not hardened enough; it wore out.
Ideas where a replacement might be had? Ace maybe?
RE: PC 7549 repair - Cabinet Monkey - 12-28-2020
try abearing supply house . I can't imagine PC used something special or proprietary for this .
RE: PC 7549 repair - Gary G™ - 12-29-2020
Thanks.........17
RE: PC 7549 repair - Bit_Fiddler - 12-30-2020
(12-28-2020, 07:59 PM)Gary G™ Wrote: Need a replacement Shaft-Roller for the jigsaw.
Part Number: 695778
Online says it’s discontinued.
I used a small bolt with nylon lock nut for a temp fix.
It’s not hardened enough; it wore out.
Ideas where a replacement might be had? Ace maybe?
My local Ace has a good selection of miscellaneous hardware - I've picked up oddball stuff like this from them quite often. A few times I've been able to upgrade to a higher grade bolt than OEM to fix a situation like this. Definitely worth trying - it might be the easy button.
RE: PC 7549 repair - Bob Vaughan - 12-30-2020
(12-28-2020, 07:59 PM)Gary G™ Wrote: Need a replacement Shaft-Roller for the jigsaw.
Part Number: 695778
Online says it’s discontinued.
I used a small bolt with nylon lock nut for a temp fix.
It’s not hardened enough; it wore out.
Ideas where a replacement might be had? Ace maybe?
Try here:
http://www.northcantonrepairshop.com
RE: PC 7549 repair - Stwood_ - 01-01-2021
(12-28-2020, 07:59 PM)Gary G™ Wrote: Need a replacement Shaft-Roller for the jigsaw.
Part Number: 695778
Online says it’s discontinued.
I used a small bolt with nylon lock nut for a temp fix.
It’s not hardened enough; it wore out.
Ideas where a replacement might be had? Ace maybe?
https://www.ebay.com/c/671335040