Woodnet Forums
"Woodworkers Journal "Irish parlor clock - Printable Version

+- Woodnet Forums (https://www.forums.woodnet.net)
+-- Thread: "Woodworkers Journal "Irish parlor clock (/showthread.php?tid=7360121)

Pages: 1 2


"Woodworkers Journal "Irish parlor clock - Jim1934 - 01-12-2021

New so not sure where to post.
Building clock from Dec. 1988 issue.
Can someone recommend a  mechanical, pendulum movement, Dial, Bezel.
Can't find a source with enough info. to know what I am buying.
Thanks, Jim.


RE: "Woodworkers Journal "Irish parlor clock - iclark - 01-13-2021

Welcome to Woodnet.

This seems as good a place as any for your question.

I will be interested in hearing the answers myself.


RE: "Woodworkers Journal "Irish parlor clock - gboot - 01-13-2021

(01-12-2021, 11:21 PM)Jim1934 Wrote: New so not sure where to post.
Building clock from Dec. 1988 issue.
Can someone recommend a  mechanical, pendulum movement, Dial, Bezel.
Can't find a source with enough info. to know what I am buying.
Thanks, Jim.

You could try Merritt’s, I purchased the movement etc for Grandfather clock from them 15 years ago. Good selection, reliable people. If your near enough interesting place to visit.
https://www.merritts.com/merritts/public/default.aspx


RE: "Woodworkers Journal "Irish parlor clock - Woodshop - 01-13-2021

I would try talking to the people at Timesavers I think they could set you up with a similar. send them the picture.
here's a dial and bezel close to what you need  https://timesavers.com/i-24052086-7-7-8-hermle-regulator-roman-dial-pan-bezel-assembly.html


RE: "Woodworkers Journal "Irish parlor clock - sniper - 01-13-2021

I've had good luck in the past with

https://www.klockit.com/


RE: "Woodworkers Journal "Irish parlor clock - bhh - 01-13-2021

I've not used them, but there is a big company here in town that might have what you need.  https://www.klockit.com/


RE: "Woodworkers Journal "Irish parlor clock - Jim1934 - 01-31-2021

(01-13-2021, 09:51 AM)Woodshop Wrote: I would try talking to the people at Timesavers I think they could set you up with a similar. send them the picture.
here's a dial and bezel close to what you need  https://timesavers.com/i-24052086-7-7-8-hermle-regulator-roman-dial-pan-bezel-assembly.html



RE: "Woodworkers Journal "Irish parlor clock - Jim1934 - 01-31-2021

gboot
You could try Merritt’s, I purchased the movement etc for Grandfather clock from them 15 years ago. Good selection, reliable people. If your near enough interesting place to visit.
https://www.merritts.com/merritts/public/default.aspx

Thanks, will take a look!


RE: "Woodworkers Journal "Irish parlor clock - Jim1934 - 01-31-2021

(01-12-2021, 11:21 PM)Jim1934 Wrote: New so not sure where to post.
Building clock from Dec. 1988 issue.
Can someone recommend a  mechanical, pendulum movement, Dial, Bezel.
Can't find a source with enough info. to know what I am buying.
Thanks, Jim.

Thanks to all. I bought a WMKit-01 from Clockworks.
Unfortunately the face/dial is 6 in. and should be about 7-3/4.
Probably never find one that matches holes for key entries.
Plans do not specify dial nor movement. Discovered original came from Rockwell but they don't recognize cat. number.
Read that there are errors in the plans. Have not spotted them but would like to hear from someone who has built this clock.
Appreciate the help. I'm 86 and want to complete this soon!
Smile.
Jim


RE: "Woodworkers Journal "Irish parlor clock - IdealEng - 02-16-2021

Just finished a Shaker wall clock. I had the bim bam pendulum movement and hands but could not find the right style and size face anywhere. So I made my own. I used a demo version of CorelDraw and with the help of Google it took all of an hour to figure out. The Corel file is scalable to any size, there are tons of fonts and the “array” drawing tools were very easy to use. I printed the face at home with some “100 year” inks and used spray adhesive to mount to 1/4” ply. I was able to print a few and really tweak the size until I got just what I wanted. Turned out great and really capped the project for me. I made the clock in the shop and the face at the computer.