+- Woodnet Forums (https://forums.woodnet.net)
+-- Thread: Shop made grinder stands (/showthread.php?tid=7360429)
Shop made grinder stands - wing nut - 01-24-2021
I'm kinda deciding how to build a grinder stand, I have a 10 inch jet grinder with cbn wheels and I need to make a stand,
Can anyone here post pix of what they did?
Just looking for ideas before I start.
thanks
RE: Shop made grinder stands - Admiral - 01-24-2021
I got one of these on sale a while back, I think I paid $30-$35 or so, it has been excellent. Well made and works for me. You could put a table on the top to set up jigs, etc. I use it for a buffer.
https://www.harborfreight.com/bench-grinder-pedestal-68321.html
RE: Shop made grinder stands - lift mechanic - 01-24-2021
I just got all the parts to build a tool stand for my air hose reel. I found a steel truck rim a piece of 4" pipe and 8" x 8" 1/4" steel plate. I like the round base as it is easy to tip on edge and roll it around.
RE: Shop made grinder stands - KLaz - 01-25-2021
I keep all my turning supplies in this cabinet that I made. Grinder is bolted to the maple top and the base set back 2" so I can register my tools in the Wolverine jig.
[attachment=32643]
RE: Shop made grinder stands - fredhargis - 01-25-2021
Here's one I did...not my design, I don't remember where I found it but it was in a woodturning book or article.
[attachment=32644]
RE: Shop made grinder stands - Stwood_ - 01-25-2021
Yep. Old 14" car wheel and a pipe.