Woodnet Forums
Bench Dog Pro Contractor Router Table - Printable Version

+- Woodnet Forums (https://www.forums.woodnet.net)
+-- Thread: Bench Dog Pro Contractor Router Table (/showthread.php?tid=7361668)



Bench Dog Pro Contractor Router Table - dawoodguy - 03-19-2021

This is BRAND NEW in the Box never opened.
It's quite heavy so shipping would probably be pretty expensive.
I'm in the Rochester NY area

$225


RE: Bench Dog Pro Contractor Router Table - mound - 03-20-2021

(03-19-2021, 12:26 PM)dawoodguy Wrote: This is BRAND NEW in the Box never opened.
It's quite heavy so shipping would probably be pretty expensive.
I'm in the Rochester NY area

$225

do you have a link to the actual model or pix?


RE: Bench Dog Pro Contractor Router Table - Ricc Havens - 03-21-2021

wish you were closer to Indiana


RE: Bench Dog Pro Contractor Router Table - BpB123 - 03-21-2021

(03-19-2021, 12:26 PM)dawoodguy Wrote: This is BRAND NEW in the Box never opened.
It's quite heavy so shipping would probably be pretty expensive.
I'm in the Rochester NY area

$225

FYI on shipping

Check out UPS flat rate, assuming it is under 50lbs and less than 1780 sq in.

I shipped a Rockwell 1072 tenon jig from San Diego to Wisconsin for under $30, ground 

It was from their website and I dropped off at a local UPS store.  The non-flat rate was above $80


-Brian


RE: Bench Dog Pro Contractor Router Table - dawoodguy - 03-22-2021

(03-19-2021, 12:26 PM)dawoodguy Wrote: This is BRAND NEW in the Box never opened.
It's quite heavy so shipping would probably be pretty expensive.
I'm in the Rochester NY area

$225

Busy weekend...sorry I didn't respond earlier...make me an offer


RE: Bench Dog Pro Contractor Router Table - dawoodguy - 03-22-2021

(03-21-2021, 02:07 PM)BpB123 Wrote: FYI on shipping

Check out UPS flat rate, assuming it is under 50lbs and less than 1780 sq in.

I shipped a Rockwell 1072 tenon jig from San Diego to Wisconsin for under $30, ground 

It was from their website and I dropped off at a local UPS store.  The non-flat rate was above $80


-Brian

Thanks Brian :-)


RE: Bench Dog Pro Contractor Router Table - dawoodguy - 03-22-2021

weighs 46 pounds
24"x27"x5"
shipped from 14445

Motivated seller


RE: Bench Dog Pro Contractor Router Table - Ricc Havens - 03-23-2021

I checked UPS Flat Rate shipping that Brian mentioned above.  This does not qualify. The largest they ***** is 1728 cubioc inches not square inches.  Based on the dimensions provided this comes out to 3240 cubic inches.  So bummer for me.


RE: Bench Dog Pro Contractor Router Table - greenacres2 - 03-23-2021

Ricc--did you get my PM a few days ago?
earl


RE: Bench Dog Pro Contractor Router Table - dawoodguy - 03-30-2021

Shameless bump....make me an offer.