+- Woodnet Forums (https://forums.woodnet.net)
+-- Thread: 3-Way Switch Help (/showthread.php?tid=7362397)
3-Way Switch Help - vernonator - 04-21-2021
Need some help on a 3-way switch. Replacing a timer at the one end with just a regular 3-way and cannot for the life of me get it to work correctly. Below is a pic of the one done when the house was built, there is no wire on the other copper screw. The box I am working on has 3-wires coming in Red/Black/White (and a ground). The timer switch had black to black, red to red, blue to white if that helps. What combo do I need there to get things working See pic below
RE: 3-Way Switch Help - vernonator - 04-21-2021
Never mind - found the solution, the timer had a jumper for the black/white wires there. Removed the jumper that was installed with the timer, and put the wires back to where they belonged on the 3-way and all is good.
I would delete this but it won't let me....stupid software.
RE: 3-Way Switch Help - TDKPE - 04-21-2021
I was going to ask why the white and black are nutted together, but there's no point now. Glad you got it working.
