Removing DeckOver Paint From a Deck - Printable Version +- Woodnet Forums (https://www.forums.woodnet.net) +-- Thread: Removing DeckOver Paint From a Deck (/showthread.php?tid=7362543) |
Removing DeckOver Paint From a Deck - crokett™ - 04-29-2021 A few years ago I made the mistake of painting our deck with DeckOver. It didn't last a year before it started peeling. I called Behr. The rep's response was "you didn't prep it properly". I told him I followed their directions. He told me I was SOL. Anyway, I want to get the rest of it off. Would a floor sander work? Would scraping and/or a chemical stripper work better? My wife won't let me just wait another year or so for the rest to peel off... RE: Removing DeckOver Paint From a Deck - Willyou - 04-29-2021 I did the same a few years ago with a similar product. I ended up using a chemical stripper to get it all off. I then used a pressure sprayer to get it all out of the pores, cracks and crevasses. The edges between the boards was a real PITA. I think sanding it off would be a lifetime project. I think that the DeckOver type products are a great concept and they look really good after application. Sure wish they worked. RE: Removing DeckOver Paint From a Deck - joe1086 - 04-29-2021 I just Googled it.....wow. Lots of horror stories out there and a class action suit settlement (too late to file now). Anyhow, if you haven't already, do a search and there are quite a few how-tos on removal. None of them easy.... RE: Removing DeckOver Paint From a Deck - crokett™ - 04-29-2021 I want to just replace the boards but with the current price of lumber that's prohibitively expensive. RE: Removing DeckOver Paint From a Deck - vernonator - 04-30-2021 (04-29-2021, 10:53 AM)crokett™ Wrote: I want to just replace the boards but with the current price of lumber that's prohibitively expensive. If you can wait lumber prices will go back down. I saw an interview just this week with the ceo of Weherhaeuser talking about the price of lumber. They had to shutter the mills/logging operations due to covid. On top of that with eveyone home and getting free gov't cheese checks there was a huge spike in demand. They are expecting to be caught up by the end of this year and expect lumber prices to go to near pre-covid levels. RE: Removing DeckOver Paint From a Deck - tomsteve - 05-01-2021 (04-29-2021, 10:25 AM)crokett™ Wrote: Would a floor sander work? i cant say if it would remove that finish but seems 36 grit drums would rip the snot out of any finish. might not be able to rent a drum sander if you mention its for a deck. they dont want screws or nails tearing up the drums. |