+- Woodnet Forums (https://www.forums.woodnet.net)
+-- Thread: A shooting board in a non-WW article (/showthread.php?tid=7363290)
A shooting board in a non-WW article - C. in Indy - 06-09-2021
I was tickled to see a shooting-board cited in a Metalworking magazine lately!
The end product idea was a short-length, very square, segment from a discarded metal rule. The rule-segment could be used in tight spots, as a measuring device or even just as a "story stick" spacing device. The rule-segment needed to be very squarely finished (and at correct desired length) after the initial rough cut-off. So, the author used a metal-file on a shooting board:
[attachment=35734]
Chris