+- Woodnet Forums (https://forums.woodnet.net)
+-- Thread: delta/rockwell 6 x 48 belt sander lubrication (/showthread.php?tid=7363576)
delta/rockwell 6 x 48 belt sander lubrication - toolmiser - 06-25-2021
I picked up a stationary belt sander a few weeks ago for $40.00-no motor or stand. I stripped a few coats of paint and gave it a spray can paint job. I am in the process of putting it back together and am wondering where and if I should lubricate it, and if so with what.
I've downloaded a couple manuals for it but nothing it mentioned of lubrication or maintenance.
Worse case I am going to oil and grease where I think is necessary and deal with results if it isn't right. I know oil/grease and dust don't mix well.
Thanks.
RE: delta/rockwell 6 x 48 belt sander lubrication - Stwood_ - 06-25-2021
Mine had all sealed bearings on the rollers.
Might oil the belt tracking do-dads so they will turn easier and keep them rust free.