Saw Vice - Printable Version +- Woodnet Forums (https://www.forums.woodnet.net) +-- Thread: Saw Vice (/showthread.php?tid=7363612) Pages:
1
2
|
Saw Vice - Scoony - 06-27-2021 Ran through the local Peddlers mall to look for a piece of plywood for a project. Saw a Wentworth saw vice in one of the booths. Rusty, but looked complete and the jaws looked straight. I think it would clean up nicely. Whats the word on these vices? Who has one and uses it? Is it worth getting and rehabbing? Asking price is $48. I do have some saws that will need sharpened soon, if not now. RE: Saw Vice - AHill - 06-27-2021 Megan Fitzpatrick inherited Chris Schwarz's Wentworth saw vise when Chris upgraded his to the Gramercy model. Chris wasn't particularly impressed with it, but he must have liked it enough, because that's what he used until he got the Gramercy. Her review here: https://www.popularwoodworking.com/woodworking-blogs/thank-you-i-think-for-the-wentworth-saw-vise/ RE: Saw Vice - bandit571 - 06-27-2021 Have a Wentworth No. 1......and use it.... [attachment=36088] Although.....I merely spent $10 on mine...... [attachment=36089] had just finished sharpening these 2 saws.... RE: Saw Vice - Mike Brady - 06-28-2021 (06-27-2021, 04:25 PM)Scoony Wrote: Ran through the local Peddlers mall to look for a piece of plywood for a project. Saw a Wentworth saw vice in one of the booths. Rusty, but looked complete and the jaws looked straight. I think it would clean up nicely. RE: Saw Vice - Tony Z - 06-28-2021 $48.00 is pretty pricey! I've seen quite a few (flea markets) for $5 to $10 and even at that price, there are not many takers. RE: Saw Vice - Mike Brady - 06-28-2021 I agree with Tony that the price is very high for that condition. J RE: Saw Vice - C. in Indy - 06-28-2021 I'm in line with Mike's comments. For my serious saw sharpening, I use adaptations to put the saw into wood jaws at my sturdy workbench or in my Workmate. I do have a pretty nice iron saw-vice similar to the one that the OP depicted, but I mainly use it for putting a filed bevel on a couple of quick/cheap scrapers I use. It does permit quite a bit of bevel angle on my file. Chris RE: Saw Vice - JIMB49 - 06-28-2021 (06-28-2021, 01:12 PM)Mike Brady Wrote: I agree with Tony that the price is very high for that condition. JTOO MUCH paid 5 for mine RE: Saw Vice - Tony Z - 06-28-2021 I don’t I paid more than $5 for any of the half dozen I have EXCEPT for the one I bought from Tools for Working Wood (Gramercy), which is very nice! RE: Saw Vice - Scoony - 06-28-2021 Thanks all. Going to pass on it. I actually made a few backsaws years ago and had made a wooden saw vice to shape and sharpen the teeth. Can't recall what I did with that vice, but don't think I have it anymore. |