Next - Printable Version +- Woodnet Forums (https://www.forums.woodnet.net) +-- Thread: Next (/showthread.php?tid=7363664) |
RE: Next - bandit571 - 07-17-2021 Used some pine scraps, instead of Ash....Ash vs Iron...doesn't always go well.... Needed a wee bit off the top.. [attachment=36547] laid out 4 notches...bandsaw to make a few cuts.. [attachment=36548] Ends are notched, for a better fit....chisel to chop the waste.. [attachment=36549] Cleaned this one up, transfer the lines to the other one...saw and chop....sand a bit, to smooth things up a bit....dry fit (with the spokeshaves) [attachment=36550] Remove the spokeshaves, add a bead of glue to the bottom of the rack...I already had a few lines marked as to where the 2 will be sitting... [attachment=36551] A press fit...then a coat of shellac.....allow to dry..reinstall the spokeshaves.. [attachment=36552] Waiting on coat #3 of the shellac to dry...then see about a coat, or 2, of a clear Gloss Poly.... Stay tuned, almost done... RE: Next - bandit571 - 07-19-2021 PIP: 2nd coat of Clear Gloss Poly [attachment=36575] Awaiting a good rub down today [attachment=36576] BTW: Added a chain for the lid, and a bit of foam liner for underneath the spokeshaves' cutters... Will rub things down, and fix any missed areas...then see how it will look... Stay tuned RE: Next - bandit571 - 07-20-2021 Got that rubbed down....added a 3rd coat, and went on some errands...this afternoon, rubbed the 3rd coat down...heated up the branding iron....not sure which takes longer..heating it up, or..cooling it down. Electric, just a case of plug it in..and wait.. [attachment=36589] A little touch-up, here and there...about ready to call this..done? [attachment=36590] And... [attachment=36591] A simple, little latch.. [attachment=36592] Brass hinges..end view? [attachment=36593] Lift the lid, to show off the chain.. [attachment=36594] Colour of the wood is simply from the Amber Shellac ( 3 coats!) [attachment=36595] Up front, A Stanley #53, then 2 by Seymour Smith & Son (highly recommend them, too!)Then a "Have no idea, but it works" shave... Size of this little box? Stands 5-1/2" tall, counting the 1-1/2" of feet. Front to back is 7-1/4", and is 12-3/8" long/wide...my hands are big enough, I do not need any handles...The Stanley No. 80 was just too big to fit IN the box...so, it gets to hang from a nail that these spokeshaves had been hanging from.. Thanks for looking in! RE: Next - BpB123 - 07-20-2021 Thanks Bandit! I like it. I really appreciate and enjoy your build-along posts. Thanks for taking the time to share -Brian RE: Next - Arlin Eastman - 07-23-2021 Bandit Alot of work but it is the best I have seen so far. Well done buddy |