CNC router project - wtb machine time - Printable Version +- Woodnet Forums (https://www.forums.woodnet.net) +-- Thread: CNC router project - wtb machine time (/showthread.php?tid=7364141) |
CNC router project - wtb machine time - Dad's Workshop - 07-27-2021 Looking for someone with a cnc router close to 60544 that is willing to machine some plywood parts. Need five of each. Have plywood already. Also have 6" and 5 " version. Five each needed for all three sizes. Cad files are Solidworks and have ability to save in multiple formats. Don' t know what files are needed? See attached for 7" size Thanks in advance! RE: CNC router project - wtb machine time - Gary™ - 07-28-2021 (07-27-2021, 07:17 PM)Dad Wrote: Looking for someone with a cnc router close to 60544 that is willing to machine some plywood parts. Those are easy. You might want to rethink the 1.5" thickness depending on your plywood RE: CNC router project - wtb machine time - iclark - 07-28-2021 I see that you already have the plywood and I am hoping that someone does step up to do what you want done. That said, though, if no one steps up, it looks like it would be relatively straight-forward to cut the shapes out of 3/4" ply with a BS or scrollsaw (plus a drill for the holes) and then gluing them together to get what you want. RE: CNC router project - wtb machine time - museumguy - 07-28-2021 Would it be practical to have someone make a template for you and then you route them yourself? RE: CNC router project - wtb machine time - Dad's Workshop - 07-31-2021 (07-28-2021, 06:58 PM)museumguy Wrote: Would it be practical to have someone make a template for you and then you route them yourself? I can make the templates. by my estimate, three templates per size, nine templates total, then make the 15 clamps but thought, if i could purchase the cnc routing time, could get the 15 clamps made more expediently and accurately replicated looking to purchase cnc router tine. RE: CNC router project - wtb machine time - museumguy - 07-31-2021 Ok, gotcha. Makes sense now. Thanks for the reply. RE: CNC router project - wtb machine time - EricU - 08-02-2021 I have been pretty happy with the online laser cutting services I have used. Cutcutsend and oshcut https://sendcutsend.com/materials/ Not sure if you can make your project fit what they can do, but with a dxf file you can get a quote online. Full disclosure: I have only had them do stainless and mild steel. I wish there were machining services like this, but they all seem to require human intervention. And emachineshop will send your job to total hacks. RE: CNC router project - wtb machine time - ryanlipski - 08-06-2021 (08-02-2021, 08:39 AM)EricU Wrote: I have been pretty happy with the online laser cutting services I have used. Cutcutsend and oshcut I've been extremely happy with sendcutsend as well. Super fast and ships ASAP. I've only had them do 0.25" AL plates... |