+- Woodnet Forums (https://www.forums.woodnet.net)
+-- Thread: Drill press chuck key (/showthread.php?tid=7364348)
Pages:
1
2
Drill press chuck key - MT Woodworker - 08-07-2021
Anyone know of a a good source for a chuck key?
I have a mid 70’s Duracraft, chuck key is worn. The chuck keys for my corded 1/2 inch drills are too small.
Thanks
RE: Drill press chuck key - 6270_Productions - 08-07-2021
Around here it is your local Ace Hardware store.
RE: Drill press chuck key - museumguy - 08-07-2021
Look for some info on the chuck. Maybe it says "Jacobs" or something similar. Also, if it has a size listed, that could help. You can't always go by the name and model number of the drill press. I replaced a chuck on my Grizzly with a different brand chck.
RE: Drill press chuck key - 6270_Productions - 08-07-2021
(08-07-2021, 08:04 PM)MT Woodworker Wrote: Thank you
I will look on the chuck and chuck key for any markings I will also check Ace Hardware
Thanks again
Take your old key with you to the hardware store. Mine has about a kabillion of them on the board. You will have to match yours to the ones they have. Most likely they will have your key . . . at least they have the one I am looking for - every single time.
RE: Drill press chuck key - museumguy - 08-08-2021
If you can find any markings, let us know. For some reason, I have several extra chuck keys. I have given them away over the years to those in need. I don't need them.
RE: Drill press chuck key - Aram - 08-08-2021
(08-07-2021, 05:25 PM)MT Woodworker Wrote: Anyone know of a a good source for a chuck key?
I have a mid 70’s Duracraft, chuck key is worn. The chuck keys for my corded 1/2 inch drills are too small.
Thanks
eBay
RE: Drill press chuck key - Cooler - 08-09-2021
Amazon shows both chucks for that drill press and keys for those chucks.
https://www.amazon.com/Heavy-Drill-Chuck-Duracraft-DP500/dp/B08CNLHZWB
RE: Drill press chuck key - museumguy - 08-09-2021
Does the key by chance have a marking on it?
RE: Drill press chuck key - Cooler - 08-10-2021
I think it is more important to look for the markings on the chuck. That can be used for compatibility checking.
RE: Drill press chuck key - 6270_Productions - 08-10-2021
(08-10-2021, 10:12 AM)MT Woodworker Wrote: Jacobs K-3 chuck key
$8 at the local Ace hardware store.
Thanks again for all the help.
