Woodnet Forums
Just a round to it project - Printable Version

+- Woodnet Forums (https://forums.woodnet.net)
+-- Thread: Just a round to it project (/showthread.php?tid=7364633)

Just a round to it project - RonB1957 - 08-23-2021

Well, I have had this little fella sitting around on my various benches all year getting moved here and there out of the way. Of course I still manage to ding and scratch it, but that's ok. It was one of those defective handles I decided to play with a bit. The mortise originally went out of whack so I decided rather than throwing it away I would just piddle a bit. So out came the epoxy and saw dust mix and I re-cut the slot/ mortise. Originally wanted something to match my triple loop half back. So here it is unfinished no less. 12", 16ppi triple loop dovetail with a 32* hang. Got a little silly with the saw plate. And yes, I drew up a carcass saw and sash version as well. Just because. :
Smile Some day I may even actually make a couple.
[Image: 51399274830_840c1aeeb7_w.jpg]" />[Image: 51398522823_416c5a71d0_w.jpg]" />

RE: Just a round to it project - Timberwolf - 08-23-2021

(08-23-2021, 05:23 PM)RonB1957 Wrote: Well, I have had this little fella sitting around on my various benches all year getting moved here and there out of the way. Of course I still manage to ding and scratch it, but that's ok. It was one of those defective handles I decided to play with a bit. The mortise originally went out of whack so I decided rather than throwing it away I would just piddle a bit. So out came the epoxy and saw dust mix and I re-cut the slot/ mortise. Originally wanted something to match my triple loop half back. So here it is unfinished no less. 12", 16ppi triple loop dovetail with a 32* hang. Got a little silly with the saw plate. And yes, I drew up a carcass saw and sash version as well. Just because. :
Smile Some day I may even actually make a couple.
[Image: 51399274830_840c1aeeb7_w.jpg]" />[Image: 51398522823_416c5a71d0_w.jpg]" />
............................
Beautiful!!!!!!!!!!!!!!

RE: Just a round to it project - Belle City Woodworking - 08-24-2021

Those things are works of art Ron!

RE: Just a round to it project - stav - 08-24-2021

lt looks great despite the initial problems.

RE: Just a round to it project - imapseudonym - 08-24-2021

Always good to get a reminder that it isn't just us hacks who screw things up and then shuffle them around from bench to bench collecting dust and nicks. Just need a little more work on that salvaging them into gorgeous final products....



(08-23-2021, 05:23 PM)RonB1957 Wrote: Well, I have had this little fella sitting around on my various benches all year getting moved here and there out of the way. Of course I still manage to ding and scratch it, but that's ok. It was one of those defective handles I decided to play with a bit. The mortise originally went out of whack so I decided rather than throwing it away I would just piddle a bit. So out came the epoxy and saw dust mix and I re-cut the slot/ mortise. Originally wanted something to match my triple loop half back. So here it is unfinished no less. 12", 16ppi triple loop dovetail with a 32* hang. Got a little silly with the saw plate. And yes, I drew up a carcass saw and sash version as well. Just because. :
Smile Some day I may even actually make a couple.
[Image: 51399274830_840c1aeeb7_w.jpg]" />[Image: 51398522823_416c5a71d0_w.jpg]" />


RE: Just a round to it project - Scoony - 08-25-2021

Wow! Really nice.

RE: Just a round to it project - Pedder - 08-26-2021

Hi Ron, that is a really nice saw! Good you saved the handle!

Cheers
Pedder