French Cleat Tool Wall - Printable Version +- Woodnet Forums (https://www.forums.woodnet.net) +-- Thread: French Cleat Tool Wall (/showthread.php?tid=7365466) |
French Cleat Tool Wall - lincmercguy - 10-12-2021 When I had my shop built, I put up this pegboard and these two cabinets that I had in a hurry just to get a workplace to put together the rest of the shop. I also had my old workbench (no drawers) underneath it. Now that I've been in the space for a while, I know what I use more often and what I use less often. I found I was getting tools out of the drawers fairly often and some items hanging on the pegboard weren't used very much. On a whim, and with plywood and OSB coming down, I decided to build a French cleat wall. The hanging items also gave me a chance to get a little more practice with the Domino. It was definitely helpful working on relatively inconsequential pieces. Before: [attachment=38189] [attachment=38190] [attachment=38191] [attachment=38192] Shelf for the most important piece of shop equipment. [attachment=38193] [attachment=38194] RE: French Cleat Tool Wall - lincmercguy - 10-12-2021 [attachment=38199] [attachment=38195] [attachment=38196] [attachment=38197] [attachment=38198] [attachment=38200] [attachment=38201] [attachment=38202] [attachment=38203] RE: French Cleat Tool Wall - museumguy - 10-13-2021 I like it. Except for one small detail. Why so few tape measures? I think I have 25, at least. RE: French Cleat Tool Wall - MT Woodworker - 10-13-2021 Very nice, gives me some ideas. ...oh and I have about 15 tape measures..... RE: French Cleat Tool Wall - lincmercguy - 10-14-2021 I thought my four tapes were enough. One is over by the lumber rack. I use metal rulers more, I have an extra one that lives on my table saw fence. Most of it are variations of pictures I saw on the web. On the drill rack, I did use screws to attach the bottom supports to the vertical pieces. If I have to get new ones at some point, I can take them off to change the width. I didn't want to permanently glue it with dominos. RE: French Cleat Tool Wall - Halfathumb - 10-14-2021 I like to use French cleats as often as I can. They're so practical. Jim RE: French Cleat Tool Wall - Gary G™ - 10-14-2021 Nice work Linc. Like it! RE: French Cleat Tool Wall - Stwood_ - 10-14-2021 Lookin good (17issosuckie,wishitwasfixed) |