+- Woodnet Forums (https://forums.woodnet.net)
+-- Thread: Table Edge Router Bit (/showthread.php?tid=7366074)
Table Edge Router Bit - Petertaylor - 11-17-2021
Am making extra leaves for a 110-year-old walnut dining table. Below is a tracing of it. Would there be a router bit like this, or will I need to figure out how to do it with a combination of bits? The top is 3/4 thick and from the sharp edge on top to the outer curve is 11/16. Thanks.
RE: Table Edge Router Bit - R Clark - 11-17-2021
You might search at MLCS. A quick look at their site shows the bit shown at this link: Table edge bit
RE: Table Edge Router Bit - joe1086 - 11-17-2021
Probably going to need a second pass with another bit to shape the bottom of your profile.
RE: Table Edge Router Bit - jteneyck - 11-17-2021
This Grizzly giant thumbnail bit would give you the main profile, and a standard roundover bit of whatever radius you like will give you the bottom.
John
RE: Table Edge Router Bit - skeeterk - 11-17-2021
Whiteside has bits for the top edge, you'll need a round over bit for the understand edge.
RE: Table Edge Router Bit - Cooler - 11-17-2021
Page 23 in the Whiteside catalog shows the thumbnail table edge bit. You will have to add a round-over bit for the bottom edge.
https://www.slideshare.net/Western-Building-Center/whiteside-machine-company-router-bit-catalog
RE: Table Edge Router Bit - Petertaylor - 11-17-2021
Thank you, everyone. The links are much appreciated.
Peter