+- Woodnet Forums (https://www.forums.woodnet.net)
+-- Thread: X-Series Bracket System by Century Components (/showthread.php?tid=7367236)
X-Series Bracket System by Century Components - Mike 55 - 01-19-2022
Hi Guys,
Has anyone heard of or used X-Series Bracket System by Century Components? They make a cool system for pantry cabinets whereby the draws are adjustable. I plan to call the local distributor as I want to see if I can just buy the system and make my own draw boxes.
This is a link to the site.
https://www.xseriesbracket.com/
https://www.centurymade.com/
RE: X-Series Bracket System by Century Components - Cabinet Monkey - 01-19-2022
Sure , you can buy just the standards with the clips and make your own boxes.
RE: X-Series Bracket System by Century Components - BillN - 01-24-2022
What kind of slides do these work best with? I watched a video where they just dropped the drawer box onto the slide and it seems like the system might work well for retrofitting into some old cabinets I have.
RE: X-Series Bracket System by Century Components - Mike 55 - 01-24-2022
(01-24-2022, 12:01 AM)BillN Wrote: What kind of slides do these work best with? I watched a video where they just dropped the drawer box onto the slide and it seems like the system might work well for retrofitting into some old cabinets I have.
I'm using VP full extension draw slides. I ordered them last week and they said they will sent on Wednesday. Once I get them I will let you know. The directions seem simple. You attach the slides to the draw box as usual and the pins have threaded holes to screw in the slide to the bracket. I was going to make to make the post and just order the pins but I decided to just order them to see how they are built. I can then duplicate it for future projects.
I found another video that explains the system.
https://www.youtube.com/watch?v=Cr1wxr4WtLs