+- Woodnet Forums (https://www.forums.woodnet.net)
+-- Thread: FS: Shaper spindles (/showthread.php?tid=7369263)
FS: Shaper spindles - Jeff Holmquist - 05-25-2022
I have three shaper spindles that I believe fit some, but not all, Delta shapers as well as others. All components are in excellent condition.
- One 1” spindle with two nuts and three spacers. No drawbar.
- Two ½” spindles, each with three nuts. No drawbar.
- One set of four ½” spacers.
- The 1” set is $110. The ½” sets are $45 each without spacers, or $60 for one ½” spindle plus spacer set. Say, $195 for all items. Prices don’t include shipping, but should be inexpensive.
Please see dimensions below. Threading for drawbars is 3/8-24. Let me know if you have questions.
Thanks for looking,
Jeff
Sierra eastside, CA
[attachment=42428]
[attachment=42429]