+- Woodnet Forums (https://forums.woodnet.net)
+-- Thread: Grizzly Chuck Insert (/showthread.php?tid=7369513)
Grizzly Chuck Insert - JoshDB - 06-11-2022
A friend gave me an old Grizzly 4 jaw chuck but it has no insert on the back. It looks like the female thread is about 1 5/8 (see pic) and my spindle is 1.25 x 8tpi. Any suggestions for a source for an insert?
Thanks,
RE: Grizzly Chuck Insert - Grey Mountain - 06-12-2022
I got mine from ONEWAY. Converts to 1X8TPI.
STRATFORD, ONTARIO, CANADA 519-271-7611 1-800-565-7288
GM
RE: Grizzly Chuck Insert - Woodshop - 06-12-2022
Grizzly
https://www.grizzly.com/parts/grizzly-insert-1-1-4-8/ph6267003
Also that chuck is a Vicmarc 100 Clone and Vicmarc 100 jaws and adapters will fit.
RE: Grizzly Chuck Insert - Woodshop - 06-12-2022
https://www.woodturnerscatalog.com/search?term=Vicmarc+VM100+Jaws
RE: Grizzly Chuck Insert - SceneryMaker - 06-14-2022
(06-11-2022, 01:20 PM)JoshDB Wrote: It looks like the female thread is about 1 5/8 (see pic) and my spindle is 1.25 x 8tpi. Any suggestions for a source for an insert?
There is a wide choice of inserts / adapters here: https://bestwoodtools.stores.yahoo.net/prstspadwith.html
but you will need a better definition of your chuck's thread than "about 1-5/8".
I don't see the one you're looking for but talk to him. He might make it for you.