+- Woodnet Forums (https://forums.woodnet.net)
+-- Thread: CBN disc set for WorkSharp 3k (/showthread.php?tid=7370231)
CBN disc set for WorkSharp 3k - nuk - 08-13-2022
Lightly used set of CBN disks for WorkSharp 3000
- 80/180 CBN Work Sharp Disk
- 350/600 CBN Work Sharp Disk
- 800/1200 CBN Work Sharp Disk
There is a line on the 800 grit surface (shown in pic below), probably from the pores getting clogged from an older (soft) chisel.
Asking $100 USD shipped in CONUS (normally $150 new plus shipping, plus wait time @ https://woodturnerswonders.com/products/work-sharp-disks-set-of-3 )
Set of 3, with original boxes
[attachment=43788]
800 grit side of the 800/1200 disk, showing the 'line'.
[attachment=43789]
RE: CBN disc set for WorkSharp 3k - HandyDandy - 08-16-2022
(08-13-2022, 11:06 AM)I'll take them, See PM
nuk Wrote: Lightly used set of CBN disks for WorkSharp 3000
- 80/180 CBN Work Sharp Disk
- 350/600 CBN Work Sharp Disk
- 800/1200 CBN Work Sharp Disk
There is a line on the 800 grit surface (shown in pic below), probably from the pores getting clogged from an older (soft) chisel.
Asking $100 USD shipped in CONUS (normally $150 new plus shipping, plus wait time @ https://woodturnerswonders.com/products/work-sharp-disks-set-of-3 )
Set of 3, with original boxes
800 grit side of the 800/1200 disk, showing the 'line'.
RE: CBN disc set for WorkSharp 3k - rambo2_981 - 08-18-2022
Have you tried Wonder Slick Stick to see if it cleans off the build-up on the 800?