+- Woodnet Forums (https://forums.woodnet.net)
+-- Thread: Rockwell Delta 46-450 Lathe (/showthread.php?tid=7370410)
Rockwell Delta 46-450 Lathe - nodima - 08-29-2022
Model 46-450 lathe $600
Motor is a 3 phase 3/4 HP but runs on standard 240 through a Teco VFD to provide total speed control. Lathe also has a reeves drive.
Lathe can be run at any speed from 0 to 3000 and is mechanically sound. Bearings replaced in headstock, tailstock and reeves drive within last few years.
Included with sale: tool rests: 24”, 12”, 6”(2), and a curved one. 3 banjos and an extension. 3 faceplate, Live center for tailstock, drive center and a Nova G3 chuck with 50mm jaws.
Apologies include original paint and patina, missing the spindle lock assembly and a couple original knobs, one lightweight banjo is cracked.
Local Pick up. Located in Wrentham MA
[attachment=43974]
[attachment=43975]
[attachment=43976]
[attachment=43977]