+- Woodnet Forums (https://forums.woodnet.net)
+-- Thread: Veritas Hinge Mortise Plane and blades - SOLD (/showthread.php?tid=7370495)
Veritas Hinge Mortise Plane and blades - SOLD - imapseudonym - 09-04-2022
This looks to have been unused by the original owner. A Veritas hinge mortise plane, complete set of all available blades and tool roll. The plane itself is out of stock at the moment at Lee Valley. First preference is to sell the whole lot together for $300 shipped (anywhere usps flat rate will go).
This includes the metric narrow, imperial narrow, an extra 3/4" wide, and 1/2" straight and spear point blades.
Apologies: There is a tiny bit of surface rust in the concave area of the adjuster knob (pictured) but none anywhere else that I could see. Blades are covered with some sort of grease/rust protectant which may have been how they came from the factory or may have been added by the original owner - not sure. I wiped off the 3/16" blade to verify condition underneath but left it on all the others. That's it, everything else is pristine.
[attachment=44057]
[attachment=44060]
[attachment=44059]
[attachment=44061]
[attachment=44058]
RE: Veritas Hinge Mortise Plane and blades - *pending* - Arlin Eastman - 09-04-2022
cripes the burl looks like it would be a wonder to turn to.
RE: Veritas Hinge Mortise Plane and blades - *pending* - imapseudonym - 09-04-2022
(09-04-2022, 04:51 PM)Arlin Eastman Wrote: cripes the burl looks like it would be a wonder to turn to.
Saving that one for something special
Makes a good photo prop in the meantime.