+- Woodnet Forums (https://www.forums.woodnet.net)
+-- Thread: Help finding cabinet hinges please. (/showthread.php?tid=7370941)
Help finding cabinet hinges please. - MstrCarpenter - 10-12-2022
My BIL and I could use help finding replacement hinges for a 45* corner kitchen cabinet. They're more commonly found as a wall unit; this one happens to be a sink base. European 35mm style, no face frame, melamine on P.B.. Because it's a diagonal corner cabinet, the angle from the back of the door to the inside of the cabinet side (where the other half of the hinge mounts) is 135*. Ideally the door should open 135* to allow some shoulder room to reach the back of the cabinet.
I told my BIL that I could easily mill a filler to utilize face frame mount hinges. That would require a trip to his house for measurements and return to install, or load up a table saw. He's ready to just toss the door. My Sister has a different opinion. I'm pretty sure these hinges are not all that uncommon.
I took some pic.s with my phone but getting them from there to here is another task I'll have to learn (later).
Thank-you in advance.
RE: Help finding cabinet hinges please. - barryvabeach - 10-13-2022
Not sure I understand, but are you looking for something like this https://www.amazon.com/Degree-Special-Cabinet-Cupboard-Combination/dp/B01EMU9Y5K/ref=asc_df_B01EMU9Y5K/?tag=hyprod-20&linkCode=df0&hvadid=198055620944&hvpos=&hvnetw=g&hvrand=17679969353642266188&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9008533&hvtargid=pla-319675862763&psc=1
RE: Help finding cabinet hinges please. - jteneyck - 10-13-2022
This Blum hinge?
John
RE: Help finding cabinet hinges please. - EdL - 10-13-2022
Blum is pretty good at putting part numbers on their products.
I would check AH Turf for a replacment.
Ed
RE: Help finding cabinet hinges please. - MstrCarpenter - 10-13-2022
Thanks for the help. The one Barry linked to looks right but I think it's for a folding door (typical to a lazy susan). This one was in the "related products" https://www.amazon.com/LIKERAINY-Hydraulic-Special-Cupboard-Wardrobe/dp/B07RSBNFMJ/ref=sr_1_6?crid=1NQGWV8H5DHER&keywords=45+degree+cabinet+hinges&qid=1665716456&qu=eyJxc2MiOiIxLjY3IiwicXNhIjoiMS41OSIsInFzcCI6IjEuODQifQ%3D%3D&s=hi&sprefix=45+degree+cabinet+hinges%2Ctools%2C89&sr=1-6
I think it's an exact replacement. I found the same thing in Blum but wasn't sure about the mounting plate, sold separately.
Thanks again!
RE: Help finding cabinet hinges please. - EdL - 10-14-2022
Make sure you have a posi-drive screwdriver / bit for install. Thats whats used on the european hinges.
Looks like a phillips but its not. A phillips will cam-out easily. Look for the hash marks on the screw head.
I have to order them on-line, not available anywhere near me.
Ed
RE: Help finding cabinet hinges please. - barnowl - 10-14-2022
Call Cabinet Parts:
https://www.cabinetparts.com/?mtm_campaign=30458000&mtm_group=849128690&mtm_source=google_ad&mtm_medium=cpc&gclid=CjwKCAjwkaSaBhA4EiwALBgQaBc1QPa2t4u5Sq8ugfRCET83rh5DUOSee-uE9Q7ySmbTBHtcYHrIzxoCtwYQAvD_BwE
RE: Help finding cabinet hinges please. - Bob10 - 10-15-2022
(10-13-2022, 10:12 PM)MstrCarpenter Wrote: Thanks for the help. The one Barry linked to looks right but I think it's for a folding door (typical to a lazy susan). This one was in the "related products" https://www.amazon.com/LIKERAINY-Hydraulic-Special-Cupboard-Wardrobe/dp/B07RSBNFMJ/ref=sr_1_6?crid=1NQGWV8H5DHER&keywords=45+degree+cabinet+hinges&qid=1665716456&qu=eyJxc2MiOiIxLjY3IiwicXNhIjoiMS41OSIsInFzcCI6IjEuODQifQ%3D%3D&s=hi&sprefix=45+degree+cabinet+hinges%2Ctools%2C89&sr=1-6
I think it's an exact replacement. I found the same thing in Blum but wasn't sure about the mounting plate, sold separately.
Thanks again!
So you have it covered? I have a knaack box full of hinges a closing shop tossed out
RE: Help finding cabinet hinges please. - MstrCarpenter - 10-16-2022
Yes, thanks. They're scheduled to be delivered to his house on Monday. I stopped by on my way back from camp for a quick look; they'll work.
https://www.amazon.com/dp/B07RSBNFMJ?psc=1&ref=ppx_yo2ov_dt_b_product_details
The best, and most important, part of this listing was the drawings with measurements. I think we all knew exactly what I needed but this was the only one with a simple mechanical drawing.
Today I was looking for an inexpensive pleated filter for a Alto Attix 50 Hepa Vac. (don't really need HEPA). So most cartridge filters have three basic dimensions; I.D., O.D., and Height. Do you think that in the 200 word description or any of the many pictures they might consider including that information? B.T.W. I'm looking for 5-1/2" I.D., about 7-1/2" O.D., and 5-1/2"- 6" tall, and the bottom can be open.