+- Woodnet Forums (https://www.forums.woodnet.net)
+-- Thread: Angled apron joinery (/showthread.php?tid=7371771)
Angled apron joinery - deancruse - 12-30-2022
I'm making a cabinet on a stand, sort of Krenov style, but mixing it up. I'm going to do mitered dovetails for the cabinet carcass, but bevel the edges toward the inside, so the doors will be inset a bit.
I saw the attached post and thought it would be cool to angle the aprons of the base to the legs – sort of match the beveled edges on the cabinet. But ... I'm struggling with how to attach them to the legs and maintain strength in the joint. At the inside of the leg, I won't have enough wood to do a mortise/tenon joint. Maybe dowels will work?
Anyone have any ideas? Maybe it's a bad idea? Appreciate any thoughts!
RE: Angled apron joinery - KC - 12-31-2022
(12-30-2022, 09:13 PM)deancruse Wrote: I'm making a cabinet on a stand, sort of Krenov style, but mixing it up. I'm going to do mitered dovetails for the cabinet carcass, but bevel the edges toward the inside, so the doors will be inset a bit.
I saw the attached post and thought it would be cool to angle the aprons of the base to the legs – sort of match the beveled edges on the cabinet. But ... I'm struggling with how to attach them to the legs and maintain strength in the joint. At the inside of the leg, I won't have enough wood to do a mortise/tenon joint. Maybe dowels will work?
Anyone have any ideas? Maybe it's a bad idea? Appreciate any thoughts!
One man's opinion... I think the aprons are distracting. Love the door trim/frame/edge, tho. To me, that's plenty of detail.
RE: Angled apron joinery - KyleD - 12-31-2022
If you made the apron pieces from thicker stock and triangle shaped instead of angling them you may be able to find enough room for a tenon. You could use the inside edge as your reference.
RE: Angled apron joinery - jteneyck - 12-31-2022
How much work are you up for? It's possible.
![[Image: AL9nZEVPiXsxMaDycEM6-uxk_gPam-FrWS0GvV0a...authuser=1]](https://lh3.googleusercontent.com/pw/AL9nZEVPiXsxMaDycEM6-uxk_gPam-FrWS0GvV0aetcmSVYmA3bgIFmfSUEpOqaE7NEAboMsa1qXkFoSBVgWREUAvEHJj0OdRlny25IRdVDAFO1i_WBpkYa88d3Bptf1yn93Y_kgwy6cFbMQAMXgcJVMApQ_kQ=w1470-h609-no?authuser=1)
![[Image: AL9nZEUmIw8toPH3xVwIr0Jbqq_P3p3Toy3WlPWf...authuser=1]](https://lh3.googleusercontent.com/pw/AL9nZEUmIw8toPH3xVwIr0Jbqq_P3p3Toy3WlPWf6QWzbRA5LZpMOuIzN3Oe8ktqd335ynC8k8_0gMi9L-UIaEKGwqDm0KM2kqwxjkrzN2moSg22oowrLpZ3Uql30QvnxEnkcwZMqdlpIl5vfgxtvhS2mZwqwg=w1470-h609-no?authuser=1)
![[Image: AL9nZEXB47w3C2jXLxsdF1tuELvQKlpsgJWPr_Pw...authuser=1]](https://lh3.googleusercontent.com/pw/AL9nZEXB47w3C2jXLxsdF1tuELvQKlpsgJWPr_PwSAufts4aeRNdQM-4tPcsMslWoIK4Wf_L7Aga01beys8vLkhXkK_QYYjJiUanjBgxmQ9ubNzbEhj0SC76_k-fR5CgqgdDMIsYJh36WI0Q8rLNYcJ6Q6wGFw=w1470-h609-no?authuser=1)
![[Image: AL9nZEVtyQLLzbyuf_sS9JD0ynOXyVrEVfoUVcvF...authuser=1]](https://lh3.googleusercontent.com/pw/AL9nZEVtyQLLzbyuf_sS9JD0ynOXyVrEVfoUVcvFkbR_7I-cm5BTkYc3KzKXKtxuXmp7rTsNisw-1e9m6ezVNoXKkcEmpn3MPBouYuNzyrBPLoQmSOHriVCXqkv5eFsMbgKHY06p9ZtKlqRKqPd81BwUs5RRQQ=w1470-h609-no?authuser=1)
John
RE: Angled apron joinery - AHill - 12-31-2022
Dowels or loose tenons would be my choice if you truly don't have enough wood to cut integral tenons or extend the length of the aprons and have them fit into slots cut into the legs.
RE: Angled apron joinery - deancruse - 12-31-2022
(12-31-2022, 01:41 PM)jteneyck Wrote: How much work are you up for? It's possible.
John
Wow, John. Probably more skills are needed than I possess! Impressive though.
RE: Angled apron joinery - deancruse - 12-31-2022
(12-31-2022, 05:26 PM)AHill Wrote: Dowels or loose tenons would be my choice if you truly don't have enough wood to cut integral tenons or extend the length of the aprons and have them fit into slots cut into the legs.
I cut an extra leg and apron to experiment with. Thought about doing a modified bridle/castle joint. I've done that before for regular aprons and it was fun. The angle would be tricky though.
RE: Angled apron joinery - Bill Holt - 12-31-2022
I hope you go for it; nice looking piece.
RE: Angled apron joinery - rwe2156 - 01-02-2023
Not a fan. Need bigger tenons that's a lot of weight on top.