Prefinished plywood as backsplash

Prefinished plywood as backsplash - Printable Version

+- Woodnet Forums (https://forums.woodnet.net)
+-- Thread: Prefinished plywood as backsplash (/showthread.php?tid=7372633)

Pages: 1 2

Prefinished plywood as backsplash - FS7 - 03-24-2023

[Image: 20230324-191604.jpg]

I used 1/2" prefinished plywood for the backs of the cabinets in this project. Those were 36", and two of the larger cabinets were 72" and 76" wide. This meant that I had odd-sized full-length (8') pieces that were about 12" wide. Not really being sure what I would do with those, as they're too small for shelves (though I'm sure I would have found a use eventually), I thought I could use them for the "backsplash" in the 5" space between the countertop and the bar top (presently being worked). I did not want to deal with tile in that space, as that would not match the "actual" backsplash (and I'm not rip cutting that much tile). So I measured and cut them down with the tracksaw, attached them using pocket holes drilled in the stud wall for the bar top, masked the countertop, and put down a bead of silicone.

It seems to be very easy for a backsplash, and given its solvent resistance and UV finish it would probably be very easy to clean and use as an actual kitchen backsplash. I imagine that's far too chintzy for most people, but I could certainly see its utility.

RE: Prefinished plywood as backsplash - fredhargis - 03-26-2023

All I see in that pic is the absolutely gorgeous wood of the countertop. Seriously, it looks good....and that finish (prefinished ply) is pretty indestructible. Well done!

RE: Prefinished plywood as backsplash - brianwelch - 03-27-2023

(03-26-2023, 05:49 AM)fredhargis Wrote: All I see in that pic is the absolutely gorgeous wood of the countertop. Seriously, it looks good....and that finish (prefinished ply) is pretty indestructible. Well done!

Yupp...What Fred said above...gorgeous!

RE: Prefinished plywood as backsplash - FS7 - 03-27-2023

Thanks. I like it too, but I'm biased because sapele is my favorite wood by far.

As I thought about it more, I realize that the cost per square foot isn't the best. At 1/2", I think I paid around $90 per sheet. So that's about $2.80 per square foot, and doesn't account for waste. No way to joint or anything like that. Hard to fasten. It is really *only* good for this type of application - long pieces that can be fastened from behind. I mean the wall tile was only about $1 per square foot. I know you need spacers, some work to cut and prep, adhesive, and so on, but it's not really an ideal solution compared to traditional backsplashes. I guess the $1 per square foot tile is an outlier (the self-checkout attendant at Home Depot thought it had rung up incorrectly, since the entire box was $16 and you can pay that per square foot for some tile).

RE: Prefinished plywood as backsplash - brianwelch - 03-27-2023

In your case it is exceptionally affordable, being that it is waste from another project...Well done...

RE: Prefinished plywood as backsplash - kurt18947 - 03-27-2023

That area shouldn't see daily heavy use like a kitchen would so I think it'll be fine. You wouldn't want anything too involved or ornate to take the eye away from that absolutely gorgeous counter.

RE: Prefinished plywood as backsplash - Gabby - 03-28-2023

(03-27-2023, 10:58 AM)kurt18947 Wrote: That area shouldn't see daily heavy use like a kitchen would so I think it'll be fine. You wouldn't want anything too involved or ornate to take the eye away from that absolutely gorgeous counter.

That is a good use of excess material , will last a long time . What will you finish the top with ? Gary

RE: Prefinished plywood as backsplash - FS7 - 03-28-2023

The counter top was finished with multiple coats of Polyx gloss. The bar top will also be finished the same way.

RE: Prefinished plywood as backsplash - Stwood_ - 03-28-2023

Looks good to me. Should be durable if not used as a dart board.

RE: Prefinished plywood as backsplash - FrankAtl - 03-29-2023

That's beautiful! Well done!