I had to use the board stretcher today - Printable Version +- Woodnet Forums (https://forums.woodnet.net) +-- Thread: I had to use the board stretcher today (/showthread.php?tid=7372842) |
I had to use the board stretcher today - FS7 - 04-19-2023 Measure twice, cut once. I measured the space properly, *thought* I measured the board properly, but apparently something was off and it ended up 1/8" short. Fortunately, I had enough left to cleanly glue it back on, and given that piece is not only 6" off the ground but will never be under stress of any kind, I figured it made more sense to use the old board stretcher rather than surface another board, cut, route, sand, finish and everything else. RE: I had to use the board stretcher today - Dumb_Polack - 04-19-2023 Dayum! That seem is practically invisible. I always say, "Can't see it from the street!" RE: I had to use the board stretcher today - Stwood_ - 04-22-2023 Looks good................. RE: I had to use the board stretcher today - toolmiser - 04-22-2023 I bet (know) you aren't the first person to cut a board too short. |