+- Woodnet Forums (https://www.forums.woodnet.net)
+-- Thread: 4-1/2" length, 1/2" diameter upcut bit source? (/showthread.php?tid=7373207)
Pages:
1
2
4-1/2" length, 1/2" diameter upcut bit source? - ®smpr_fi_mac® - 06-09-2023
I can find lots of 4" bits (too short) and lots of 5" bits (too long) but cannot find a 4-1/2" or a 4-3/4" bit.
Can anybody help?
RE: 4-1/2" length, 1/2" diameter upcut bit source? - iclark - 06-09-2023
(06-09-2023, 06:03 PM)®smpr_fi_mac® Wrote: I can find lots of 4" bits (too short) and lots of 5" bits (too long) but cannot find a 4-1/2" or a 4-3/4" bit.
Can anybody help?
Can you explain what you are trying to do?
I am having trouble picturing what could not be done with the 5" and a depth stop.
RE: 4-1/2" length, 1/2" diameter upcut bit source? - ®smpr_fi_mac® - 06-09-2023
I want to mortise deeper with my Mortise Master but a 5" bit extends too far from my router base.
RE: 4-1/2" length, 1/2" diameter upcut bit source? - ®smpr_fi_mac® - 06-09-2023
Wait.
I just realized that I can raise the base *just* enough to make it work.
Never mind!
RE: 4-1/2" length, 1/2" diameter upcut bit source? - iclark - 06-09-2023
(06-09-2023, 10:32 PM)®smpr_fi_mac® Wrote: Wait.
I just realized that I can raise the base *just* enough to make it work.
Never mind!
Thanks for the explanation.
Would love to see what you are building.
RE: 4-1/2" length, 1/2" diameter upcut bit source? - ®smpr_fi_mac® - 06-09-2023
(06-09-2023, 10:46 PM)iclark Wrote: Thanks for the explanation.
Would love to see what you are building.
I just made my first sale on my website to somebody that I've never met! I'm kinda excited.
I presented them the attached pic that I found online. They love it so I'm building it in white oak.
I just started it this week; the lumber has been milled to thickness and I start building this weekend.
I'm recording the entire build process to create my first real YouTube video, so not many pics, but I'll start a thread when it's done.
RE: 4-1/2" length, 1/2" diameter upcut bit source? - iclark - 06-09-2023
I, for one, will definitely be looking forward to it.
Congratulations on your sale.
RE: 4-1/2" length, 1/2" diameter upcut bit source? - jteneyck - 06-10-2023
Looking at your project it's not at all obvious to me why you would need even a 4" bit to create the mortises. A 1-1/2 to 2" deep mortise should be more than enough for those joints.
Good luck with your first website sale. I agree; it sounds pretty exciting.
John
RE: 4-1/2" length, 1/2" diameter upcut bit source? - ®smpr_fi_mac® - 06-11-2023
(06-10-2023, 08:54 PM)jteneyck Wrote: Looking at your project it's not at all obvious to me why you would need even a 4" bit to create the mortises. A 1-1/2 to 2" deep mortise should be more than enough for those joints.
Good luck with your first website sale. I agree; it sounds pretty exciting.
John
That's exactly why I needed the longer bit--a 4" bit barely gets me a 1" deep mortise with the jig.
RE: 4-1/2" length, 1/2" diameter upcut bit source? - Cabinet Monkey - 06-11-2023
Amana has what you’re looking for.