+- Woodnet Forums (https://forums.woodnet.net)
+-- Thread: Working on a 6-pak? (/showthread.php?tid=7373781)
Working on a 6-pak? - bandit571 - 08-31-2023
To carry around a few of these..
[attachment=48213]
Used this one to lay things out on the bottom of the carrier..
[attachment=48214]
The Infamous "Full Sized Drawing"
Then a couple ends were milled...
[attachment=48215]
Then a center divider laid out
[attachment=48216]
So I could also lay out the 2 dividers...
[attachment=48217]
The decide how to attach this...
[attachment=48218]
To the ends..and attach the center divider, too..
[attachment=48219]
Finger joints?
That was about it for a 1 hour of shop time last night...try again later, today?
Stay tuned..
RE: Working on a 6-pak? - bandit571 - 09-29-2023
Just an Update....as the Carrier has left the building...
[attachment=48465]
And...in use?
[attachment=48466]
Can carry 6 of about any Beverage...bottles or cans..
[attachment=48467]
Coat of Witch's Brew...and a coat of Amber Shellac....
Just puttering around IN the shop....using up a few sticks of thin Scraps...
RE: Working on a 6-pak? - stav - 10-01-2023
Looks great. Be careful with that Mt Dew.
Did you fabricate the handle as well?
RE: Working on a 6-pak? - Stwood_ - 10-01-2023
Where do the ice cubes reside?
RE: Working on a 6-pak? - bandit571 - 10-01-2023
Carry them in a glass....