+- Woodnet Forums (https://forums.woodnet.net)
+-- Thread: Easiest, fastest finish? (/showthread.php?tid=7373807)
Easiest, fastest finish? - Gary G™ - 09-03-2023
In case a finisher doesn’t venture downstairs….
Installed a pine T&G wall running horizontally in a public building.
Mrs G is going to finish it today after I tell her what to use.
No stain.
Only available source for finish is local HD.
The question is will a Water-based poly need a seal-coat?
I know pine can blotch, but if there’s no stain—only a clear WB Poly—is blotching a concern?
RE: Easiest, fastest finish? - Gary G™ - 09-03-2023
OBE—she’s well on the way.
RE: Easiest, fastest finish? - rwe2156 - 09-05-2023
(09-03-2023, 11:09 AM)Gary G™ Wrote: The question is will a Water-based poly need a seal-coat?I put it in my shop. I just rolled it on and used a brush in the grooves. I found end grain areas around knots can soak up the finish, so several coats will be necessary.
I know pine can blotch, but if there’s no stain—only a clear WB Poly—is blotching a concern?
Blotching wouldn't be an issue.
RE: Easiest, fastest finish? - Gary G™ - 09-09-2023
This was completed before any responses.
It worked fine w/o sealing. No blotches.