+- Woodnet Forums (https://forums.woodnet.net)
+-- Thread: Stain blocking (/showthread.php?tid=7374020)
Stain blocking - JTTHECLOCKMAN - 10-03-2023
[attachment=48500][attachment=48501]I have a cabinet that I am working on and it is made of soft maple, I believe.. (I have included a couple photos) I used bloodwood as some accent pieces. I started this project about 10 years ago and and finally getting around to finishing it I hope. At that time my thoughts were to just put a clear finish on it and be done with it. But now that I decided I want to put it in my den and the walls will be a light grey color, I was thinking of staining it a light grey. But I worry about the bloodwood detail. I do not want to lose the red color. So my question is there a way to stain just the maple and not have bleedoff into the bloodwood?? Or should I just stick with original idea and go natural. Now if I were to stain what is a good stain to use? I am thinking oil for better penetration and be able to highlight the grain some? I will be doing a satin lacquer finish as top coat. Any tips or pointers is helpful. Thanks.
John T.
RE: Stain blocking - fredhargis - 10-04-2023
My approach would be the pass on any stain and go with just a top coat of some kind.
RE: Stain blocking - JTTHECLOCKMAN - 10-04-2023
(10-04-2023, 06:25 AM)fredhargis Wrote: My approach would be the pass on any stain and go with just a top coat of some kind.
Thank You.