(01-09-2024, 03:48 AM)bandit571 Wrote: IF the OP really wants to try out a spokeshave..I'll send him a Stanley spokeshave....since it is a spare and all I would need is an Address to mail it to.  

Currently, I have 2 Seymour Smith & Son Spokeshaves I always use....I can refresh the edge on the Stanley one, and have it IN the mail....

I'd have to go and check out what Model Number it is....will do that later today..

(01-08-2024, 09:05 AM)ajkoontz Wrote: useful/ why? - it depends. Spokeshave wasn't a game changer for me, but it is very handy to have. I'm getting into building chairs, and for that they are indispensable, but for mostly flat work I can't make a compelling case to get one. If you're a WW without a lathe (like me) and occasionally want to make square things round (or round-ish) then a spokeshave is pretty handy to have around.

which one?- This is a little easier to answer. #1 Paul Sellars has a pretty good video on YT talking about which one to buy and why. I'll add my 2 cents. Absolute best spokeshave you can get right now, IMO, is the Veritas flat bottom. It's based on the 151 (adjustment mechanism), and a flat bottom is a good spokeshave to have if you only have one. Second best bet, get a vintage 151, or copy. Stay with the 151 version as the two adjustment screws are the way to go. These average around $50 on ebay, etc. You may be able to find one cheaper, but good luck, it seems to me the prices on these have gone up. I used to see them for $10-$15 all day long at fleas, but haven't seen a decent one this low for quite a while. Third option is look at Taylor Tools 151 clone, around $25 on Amazon. The fit and finish is not as good on these as a vintage, but it's a decent budget option if you want to try one out and see if you like spokeshaves in general. I bought one of these for my son, so he'll keep his mitts off my Veritas. Again, the Veritas is my favorite, by far. One of the things I like best is the thick blade, which makes it easier for me to freehand sharpen. The 151's have pretty thin blades and they are too short to fit in a jig so they can be a bit fussy to sharpen. I also like the round/ wood handles on the Veritas as they are more ergonomic to me.