![]() |
Time to remodel - Printable Version +- Woodnet Forums (https://forums.woodnet.net) +-- Thread: Time to remodel (/showthread.php?tid=7374895) |
Time to remodel - bandit571 - 01-25-2024 And..out with the old.. [attachment=49582] As this just wasn't working out...so [attachment=49583] Rip out the old hanger, buy a supply of these at Wall E World...squeeze them together to hold on the smaller parts of a drill..and install.. [attachment=49584] Including a couple hangers left as is...to hold the hammers and the 2 Pilot Hole Drills.... Had to go back to Wall E World for a re-supply... [attachment=49585] and bought the last of each style....one for a cutting gauge.. [attachment=49586] And the rest to replace the rack the Brace Drills used to call home.. [attachment=49587] as the wooden rack was falling down.. [attachment=49588] So...remove the old rack.. [attachment=49589] The Stanley 14" sweep was to go here....except it would be hitting the rack of squares....some shuffling around, and.. [attachment=49590] Including the 2 BIG Eggbeaters....Goodell Pratt Co. No. 5-1/2 B and a Millers Falls No. 2-01 [attachment=49591] With the #5-1/2B's LONG side handle hanging right in front. About a $60 remodel....that was in need of doing. Looks better, too? RE: Time to remodel - Arlin Eastman - 01-25-2024 Yep looks better and sure they do to RE: Time to remodel - Pedder - 01-25-2024 Hi Steven, impressive collection! New camera? Much better pictures! Cheers Pedder RE: Time to remodel - bandit571 - 01-25-2024 Thanks! Same camera, learning to focus better...without Auto-Focus.... On the Brace drills...L-R: 6" sweep, 6" sweep, 12" Pexto Samson Chuck, Stanley 14" sweep, Pexto 10" sweep, Samson Chuck, and a 8" sweep... 6" sweeps brace drills...different chucks, un-sure about the Makers... RE: Time to remodel - Stwood_ - 01-25-2024 Much better Bandit Now for more orphans to show, so you can expand yet again. |